联想启天电脑cmos和bios.doc

联想启天电脑CMOS和BIOS1、Standard CMOS FeaturesSystem Date (sut 04/30/2011)System Time (19:34:54)▲Primary IDE Master(Hard Disk) Primary IDE Master Device ：Hard disk Vendor ：ST3160815AS Size ：154.7GB LBA Mode ：SupportedBLOCK Mode ：16sectorsPIO Mode ：4Asyne DM4 ： Multiuord DMA-2UItra DMA ：UItra DMA-5 S．M．A．R．T ：Supported Type (AUTO) LBA/Large Mode9 (AUTO)Block9M(Multi-sector Trausfer) (AUTO)PIO Mode (AUTO)DMA Mode (AUTO) S.M.A.R.T. (AUTO)32bit Data Transfer (Enabled)▲Primary IDE Slave (ATAPI CDROM) Primary IDE Slave Device： ATAPI CDROM Vendor：TSSTcorp DVD-ROM TS-H353B LBA Mode ：supportedIO Mode ：4Asyne DM ：Multiuord DMA-2UItra DMA ：UItra DMA-2Type(AUTO)PIO Mode (AUTO)DMA Mode (AUTO)▲Secondary IDE Master (Not Detected) Secondary IDE Master Device： Not Detected Type (AUTO) LBA/Large Mode (AUTO)Block(MuIti-sector Trausfer) (AUTO)PIO Mode (AUTO)DMA Mode (AUTO) S.M.A.R.T (AUTO)32bit Data Transfer (Enabled)▲Secondary IDE Slave (Not Detected) Secondary IDE SlaveDevice： Not DetectedType (AUTO)LBA/Large Mode (AUTO)Block(MuIti-sector Transfer) (AUTO)PIO Mode (AUTO)DMA Mode (AUTO)S.M.A.R.T (AUTO)32bit Data Transfer (Enabled)FloppyA (Disabled)Nalt on (All Errors)Base Memory ：600KBExtinded Memery ：1023MBTotal Memery ：1024MB2、Advance,BIOS FeaturesFloppy Statua (Disabled) (黙认为Enabled)Fast Boot (Enabled)BIOS Protect (Disabled)StartUp Device Memprompt(Enabled)▲CPU Features (press Enter)Configure advance cpu settinysManufacturer ：IntelIntd(R) Pentium(R) Dual CPU E2200 ＠2.20GHzFrequency：2.20GHzFSB Speed：800MHzCache L1：64KBCache L2：1024KBRtio Actual Value 11Max CPUID Value Limit (Disabled)Exicute Dissble Bit (Enabled)▲Boot Device Priority (Press Enter) Boot Device Priority1st Boot Device (Removable Dek)2nd Boot Device (Hard Drive) 3rd Boot Device (CD/DVD)4th Boot Device (Nettwork:RealeeKB)▲Herd Disk Drives (Press Enter) Herd Disk Drives 1st Drive (HDD：PM ST3168015AS)▲CD/DVD Drives (Press Enter) CD/DVD Drives1st Drive (CD/DVD：PS-TSSTcorp)Try Other Drvice (Enabled)Boot Up Mum-lock (On)Password Check (Setup) 这项没有Acpl APIC Support (Enabled)MPS Revision (1.4)3、Advance Chipset Features Configuer DRAM Timing by SPD DRAM Fregueucy (AUTO)Init Graphic Adapter (PEG/PCI)DUM Mode Select (DVMT Mode)DVMT/FIXED Memory (128MB)Spread Spectrum (±0.25％)4、Power Mangenent SetupACPI Suspend Mode 〔S3(STR)〕Resume On PME＃ (Enabled)Resume On RTC Alarm (Disabled)5、Pnp/PCI ConfigurationClear NVRAM (No)Resources Controlled By 〔AUTO(ESCD)〕6、Integrsted Peripharals▲Onchip IDE Device (Press Enter) Onchip IDE Device AFA/IDE Configuration (Enhanced) Legacy IDE Cannels (SATA PripASeel) IDE Detect Iim Out (See) 〔35〕▲Onboard Device (Press Enter)Onboard Device ConfigurationUSB Functions (Enabled)USB 2.0 Contrwller (Enabled)USB Keyboard Legacy Support (Enabled)USB Mousc Legacy Support (Enabled)Audio Controller (Enabled) Onboard LAN Device (Enabled)Onboard LAN Boot ROM (Enabled)▲ Snper Io Device (Press Enter) Snper Io Device OnBoard Floppy Controller (Disabled) Parallel Port Mode (EPP+ECP) ECP Mode DMA Chance (DMA3) Restore On AC Power Loss (Power Off)7、PC Htealth StatusTenovo Fan Policy (Enabled) CFD n 30 CFD m 100CFAS Lope 10SFD n 40 SFD m 100FSS Lope 10DeltaT 3CPU Warning TemperaureShut Down Temperaure PC Htealth StatusCurremt System Temperature 40℃/104℉Curremt CPU Temperature 40℃/104℉Vcore(V) 1.312V+3.3V 3.396V8、Change User Password 9、 Load Optimal Defaults 10、 Load Failsafe Defaults 11、Save Changes And Exit 12、Discard Changes And ExiltHelp Item Select The Type Of Device To The SystemSelect the ACPI stat used for system SuspendClear NVRAAM durihy system Boot。