TD-SCDMA(UE); Radio Transmission and Reception

1、 TS C401 V3.0.0 (1999-10)Technical SpecificationChina Wireless Telecommunication Standard (CWTS); Working Group 1 (WG1);TD-SCDMA (UE); Radio Transmission and ReceptionCWTS27/27 UE: Radio Transmission and Reception Contents1 SCOPE42REFERENCES43DEFINITIONS, SYMBOLS AND ABBREVIATIONS53.1Definitions53.2Symbols53.3Abbreviations64GENERAL74.1Measurement uncertainty75FREQUENCY BANDS AND CHANNEL ARRANGEMENT85.1General85.2Frequency bands85.3TXRX frequency separation85.4Channel arrangement85.4.1Channel spa

2、cing85.4.2Channel raster85.4.3Channel number86TRANSMITTER CHARACTERISTICS96.1General96.2Transmitting power96.2.1UE maximum output power96.3UE frequency stability96.4Output power dynamics106.4.1Open loop power control106.4.2Closed loop power control106.4.3Power control step106.4.3.1Minimum requirement106.4.4Power control cycles per second106.4.4.1Minimum requirement106.4.5Minimum transmit output power106.4.5.1Minimum requirement106.4.6Power control dynamic range106.4.6.1Minimum requirement116.5Tr

3、ansmitting OFF power116.5.1Minimum requirement116.6Output RF spectrum emissions116.6.1Occupied bandwidth116.6.2Out of band emissions116.6.2.1Spectrum emission mask116.6.2.1.1Minimum Requirement116.6.2.2Adjacent Channel Leakage power Ratio (ACLR)126.6.2.2.1 Minimum requirements126.6.3Spurious emissions126.6.3.1Minimum requirements126.7Transmitting intermodulation136.7.1Minimum requirements136.8 Transmit Modulation136.8.1 Transmit pulse shape filter136.8.2 Modulation accuracy146.8.2.1 Minimum requ

4、irement146.8.3Peak Code Domain Error146.8.3.1Minimum Requirement147.RECEIVER CHARACTERISTICS157.1General157.2Diversity characteristics157.3Reference sensitivity level157.3.1Minimum Requirements157.4Maximum input level157.4.1Minimum Requirements167.5Adjacent Channel Selectivity (ACS)167.5.1Minimum requirement167.6Blocking characteristics167.6.1Minimum Requirement167.7Spurious response characteristics177.7.1Minimum Requirement177.8Intermodulation response characteristics187.8.1Minimum requirement1

5、87.9Spurious emissions187.9.1Minimum Requirement188PERFORMANCE REQUIREMENTS198.1General198.2Dynamic reference sensitivity performance198.2.1Demodulation in AWGN Channel198.2.1.1Single link performance198.2.1.2Multi link performance198.2.2 Performance in multipath fading channels208.2.2.1Single link performance208.2.2.1.1Performance without TPC208.2.2.1.2Performance with TPC208.2.2.2Multi link performance218.3Rx synchronisation characterisitics218.3.1Synchronisation performance218.3.1.1Search of

6、other Cells218.3.1.1.1Minimum requirement218.3.2Inter-Frequency Handover.218.3.2.1Minimum requirement228.4Timing requirements228.4.1Synchronization228.4.1.1Minimum requirement22ANNEX A (NORMATIVE): TRANSMITTING POWER LEVELS VERSUS TIME22ANNEX B (NORMATIVE): PROPAGATION CONDITIONS23B.1Test environments23B.2Propagation Conditions23B.2.1Static propagation condition23B.2.2Multi-path fading propagation conditions23ANNEX C (NORMATIVE): ENVIRONMENTAL CONDITIONS25C.1General25C.2Environmental requirement

7、s for the UE25C.2.1Temperature25C.2.2Voltage25C.2.3Vibration26HISTORY271 ScopeThis document establishes the minimum RF characteristics of TD-SCDMA for the User Equipment (UE).2ReferencesThe following documents contain provisions, which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or nonspecific. For a specific reference, subsequent revisions do not apply. Fo

8、r a non-specific reference, subsequent revisions do apply.3Definitions, symbols and abbreviations3.1DefinitionsFor the purposes of the present document, the following definitions apply:Power settingThe value of the control signal, which determines the desired transmitter output power. Typically, the power setting would be altered in response to power control commands.Maximum power settingThe highest value of the power control setting which can be used.Maximum output powerThis refers to the measure of power when averaged over the transmitting timeslot at the maximum power setting.Peak power The instantaneous power of the RF envelope which is not expected to be exceeded for 99.9% of the time.Maximum peak powerThe peak power observed when operating at a given maximum output power.Average transmitting powerThe average transmitter output power obtained over any specified time interval, including periods with no transmission. Editors: This defini

《TD-SCDMA(UE); Radio Transmission and Reception》由会员人***分享，可在线阅读，更多相关《TD-SCDMA(UE); Radio Transmission and Reception》请在金锄头文库上搜索。