新产品验证测试程序

1、 Document Name 文件名称New Products Verify test procedure新产品验证测试程序Document No.文件编号XXX-XX-XXXXVersion版本A New Products Verify Test Procedure新产品验证测试程序Review and Signature会签FunctionPrepared byReviewed byApproved byPositionNameSignatureDateChange history更新记录VersionIssued DateChanged contentPrepared byReviewed byApproved byTABLE OF CONTENTS 目录1. Purpose and scope4目的和范围42. Definitions4定义43. Authority and responsibility4职责和权限44. Reference4参考文件45. Method4方法45.1New products test criteria4新产品测试标准45.2New produc

2、ts testing5新产品测试55.3 New products training5新产品培训55.4 Test sample save and tracking5试验样品的保存可追溯性55.5 Record5记录56. Form5相关表单57. Attachment6附件6无6 1. Purpose and scope目的和范围The purpose of this procedure is to standardize management of the new products verify process, to sure verify testing process meeting requirements and to effectively control results are accurate and on time.为了规范新产品验证测试工作，确保新产品验证测试符合相关要求，按时有效完成，制定本程序。2. Definitions 定义Verify test： the test performed for verify function, property and

3、service life etc. on new products验证测试：本程序涉及的验证测试仅指在实验室进行的新产品的功能、性能、寿命等测试3. Authority and responsibility职责和权限Lab实验室Engineering(EE and ME)工程(EE和ME)Responsible for implementation and maintenance of thisprocedure负责本程序的履行和维护。Responsible for make new products testing schedule负责新产品验证测试计划的制定Responsible for arrange and perform new products verify testing负责新产品验证测试的安排和实施Responsible for confirm the test content for new products verify testing.负责新产品验证所需测试项目的确认Responsible for provide suitable verify testing s

4、ample负责验证用样品的提供Responsible for training and support lab staff resolve the problem on new products which occur during the test process 负责培训和协助解决验证测试中出现的与产品相关的问题4. Reference 参考文件XXX-XX-XXXX New Product Introduction Procedure 新产品导入程序5. Method 方法5.1New products test criteria新产品测试标准5.1.1 Lab provide new products test criteria draft according to the products function, drawing and technical documents which provide by ENG (EE and ME). Mainly involved general standard test实验室根据工程部门(EE和ME)提供的新产品的功能和图纸等技术文

5、件提出新产品验证测试的标准草稿，主要包括通用的标准测试5.1.2 ENG is responsible for provide special test criteria. ENG (EE and ME) department review and approve new products test criteria. 工程部(EE和ME)提供特殊测试的标准，审核并批准新产品验证测试标准。5.2New products testing 新产品测试5.2.1 Lab is responsible for make new products test schedule and perform test work according to ENG (EE and ME) approved new product test criteria. 实验室负责根据工程部(EE和ME)批准的新产品测试标准制定新产品测试计划并执行测试工作。5.2.2 Lab is responsible testing according to criteria requirements, and provide te

6、st result.实验室负责按照要求测试，如实提供测试结果。5.3 New products training新产品培训 For new products and its parts function, non-standard testing/verification method, product assembly, etc., technology knowledge ENG (EE and ME) department is responsible for training of laboratory personnel, and keep training record.针对新产品及其零部件的功能、非标准检测/验证方法、产品组装等技术知识，工程部(EE和ME)负责对实验室相关人员进行培训，并保留培训记录。 5.4 Test sample save and tracking试验样品的保存可追溯性 5.4.1 All test data the laboratory shall be completed to save.所有试验项目的资料存档于实验室，实验室应妥为保存. 5.4.2 All sample back to initiator所有的样品返回到送样人.5.5 Record记录This procedure involves all records storage life for reference records control procedures程序涉及的所有记录保存期限参照记录控制程序6. Form相关表单XXX-XX-XXXX Product Specification & Test Criteria产品规格和测试标准XXX-XX-XXXX Parts test criteria list 零件测试项清单7. Attachment 附件无Page 6 of 6

《新产品验证测试程序》由会员Watc****vies分享，可在线阅读，更多相关《新产品验证测试程序》请在金锄头文库上搜索。