cc1500-可编程.pdf

1HOLLOW SHAFT ENCODER- Optical Incremental sensing, Industry Standard Size 58mm- Easy mounting for the hollow shafts thanks to DAC (Anti-Coupling Device). - Robustness and excellent resistance to shocks / vibrations.- 300 kHz Maximum Frequency.MECHANICAL CHATACTERISTICSSeen from the shaft 90° ° A A/ B B/ Z/ Z 2.5 VVOH > Vcc – 3 V“Low” signal levelVOL < 0,5 VVOL < 2.5 VPushi-pull (HTL)Output Circuit RS422 (TTL-compatible) Supply Voltage5V or 5-30V5-30V Current Consumption40 mA (max)40 mA (max)Impulse Frequency300 kHz (max)300 kHz (max)EMC EN61000-6-2 and EN61000-6-4Vibration resistance 100g, 6ms (IEC 68-2-27)Storage Temperature -40˚...+80˚ C Shock resistance 100g, 6ms (IEC 68-2-27)Maximum load permitted on shaft Axial 20 N,Radial 50 NStarting Torque 0.5 NmRotor inertia moment 30 gcm ProtectionIP 65Maximum number of revolutions permitted mechanically 12 000 rpm Bearings lifetime rev 1x10ShaftStainless SteelHosing AluminiumShaft fixation Front or Rear clamp Bearings BallracesOperating Temperature -30˚...+70˚ CWeight 560g................................................................................................................................................................. ............................................................................................................................................................. .......................................................................................................................................................................................................................................................................................................................................................................................................................................................... ............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................. ....................................................................................................................................................................................................................................................................................................................Output waveformsCARLEN sensors info@- hrough hollow shaft 14mm, with reduction hubs in aluminium of 6, 8, 10 and 12 mm.FunctionCable Colour Code12 Pin Connector0 Volt+ Volt A B 0 A B 0whitebrown green yellow grey pink blue red12 3 4 5 6 7 8¯ ¯ ¯ Ground case shieldingshielding2ORDERING CODEMECHANCIAL DRAWINGSRadial Cable exit 2mCARLEN sensors sales02@CC 1500-aSeries Incremental EncoderbShaft Type 4=hollow shaft-efPower supply 2= 5Vdc 6= 5-30VdcghPulse perRevolution 1024,2048.4096....j Connection 6= 2m Cable (standard)Output circuit 3=TTL 5=HTLConnector Location 1=Axial 2=Radial8= M23 Connector 9= Terminal Box SXX---4dShaft size 8,10,12,14mma b d e f g h j OptionTRadial Connector, M23, 12pins。