PLC接口信号ppt课件.ppt

Date:9/1/2024File:09_PLC_Interface 1SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and DrivesPLC 接口信号接口信号NCKPLCCommunicationAdministration of parts programsPosition controlChannel 1InterpretationPreparationProcessingInterpolationMachine logicRelease signalsInhibit signalsMachine operationAlarms and messagesSignal MSTTInput/output blocksChannel nInterpretationPreparationProcessingInterpolationDate:9/1/2024File:09_PLC_Interface 2SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and Drives基本程序的结构基本程序的结构User prog.FB1: GP_AnlFC 2: GP_CycOB100Start-upOB1CyclicprocessingOB40Process alarmFC 3: GP_AIUser progr.User prog.FB 4/7: PI servicesFB 5: reading of GUDFB 2/3: NC data transferFC 19/24/25: MCPFC 18: Spindle controlFC 17: Star/TriangleFC 16: Partition axisFC 15: Positioning axisFC 13: BHG DisplayFC 10: Errors/messagesFC 9: Asynchronous UPFC 7, 8, 22: WZVFC12: Processing HIFUFC 21: fast NCK-PLCFC 26: PHGFB 29: Signal recorderDate:9/1/2024File:09_PLC_Interface 3SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and Drives块概览块概览An increased amount of FB‘s, FC‘s and DB‘s is available in combination with the hardware „Integrated PLC CPU315-2DP Master/Slave“ with SINUMERIK 810D/840D.Date:9/1/2024File:09_PLC_Interface 4SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and Drives接口接口DB块概揽块概揽DB30Kanal 10DB 2MessagesDB 9NCSignals to NCK Compile cyclesSignals from NCK Compile cyclesDB 10NCSignale to NCKSignals from NCKDB 11BAG 1...10Signale to NCKSignals from NCKDB 19MMCSignals from MMCSignale to MMCDB 71-73Tool administrationAssignment of–Load/unload stations–Spindle–ResolverDB21Kanal 1Signale to NCKSignals from NCKDB61Axis/spindle 31DB32Axis/spindle 2DB31Axis/spindle 1Signale to NCKSignals from NCKDB 18Safety SPLDB 20PLC-MDDate:9/1/2024File:09_PLC_Interface 5SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and Drives机床控制面板机床控制面板MCP-MMCP-TDB10Key switchDB11Operating modesDB21-30Direction keysNC Start, NC StopDB31-61Direction keysOverrideStart/Stop axisIB n ... IB n+7 QB m ... QB m+5 FB1FC19FC25Date:9/1/2024File:09_PLC_Interface 6SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and Drives机床控制面板的接口信号机床控制面板的接口信号Date:9/1/2024File:09_PLC_Interface 7SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and Drives轴轴/主轴接口信号主轴接口信号在轴或主轴的在轴或主轴的PLC接口信号中下列信号必须置位：接口信号中下列信号必须置位：IS „Controller enable” (DB31, ... DBX2.1)IS „Pulse enable” (DB31, ... DBX21.7)IS „Position measur. system 1/2” (DB31, ... DBX1.5, DBX 1.6)如果轴如果轴/主轴要运动，下列接口信号不能被置位：主轴要运动，下列接口信号不能被置位：IS „Feed/Spindle override switch” (DB31, ... DBB0) not to 0%IS „Axis/Spindle disable” (DB31, ... DBX1.3)IS „Follow up mode” (DB31, ... DBX1.4)IS „Distance to go/Spindle–Reset” (DB31, ... DBX2.2)IS „Feed stop / Spindle stop” (DB31, ... DBX4.3)IS „Traverse key disable” (DB31, ... DBX4.4)IS „Ramp function generator disab.” (DB31, ... DBX20.1)IS „Read-in disable“(DB21, ... DBX6.1)IS „Feed disable“(DB21, ... DBX6.0)Date:9/1/2024File:09_PLC_Interface 8SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and Drives报警和操作提示报警和操作提示 (DB2)...Date:9/1/2024File:09_PLC_Interface 9SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and Drives报警和操作提示报警和操作提示Date:9/1/2024File:09_PLC_Interface 10SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and Drives用于用于MMC103和和PCU50的报警文本的报警文本C:\USER\MYPLC_GR.COMDate:9/1/2024File:09_PLC_Interface 11SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and Drives报警文本文件报警文本文件 MBDDE.INIC:\USER\MBDDE.INIDate:9/1/2024File:09_PLC_Interface 12SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and DrivesMMC/PCU上上PLC状态状态Date:9/1/2024File:09_PLC_Interface 13SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and DrivesSINUMERIK 840D的的MPI地址地址MPIBTSS2 MCP/Interface customeroperating panels max.and 1 BHG can be connectedto the BTSS1,5 MBd187,5 kBdPG0Step 7/IBN-ToolNCK3PLC2COM13optionalStandard configurationMMC100/103PCU501st MCPInterfaceCustomer op. panel110612OP 030PG02nd MCP8BHG15Bus addressesStep 7/IBN-ToolDate:9/1/2024File:09_PLC_Interface 14SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and DrivesSINUMERIK 810D的的MPI地址地址MMC100/103PCU501st MCPInterfaceCustomer op. panelNCK11014123PLCMPI Bus187,5 kBaud2OP 030PG/IBN-Tool STEP7 02nd MCP8BHG15Bus addressesSINUMERIK 810DoptionalStandard configurationDate:9/1/2024File:09_PLC_Interface 15SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and DrivesPG/PC 接口设定接口设定Date:9/1/2024File:09_PLC_Interface 16SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and Drives“可以访问的结点可以访问的结点”810D 187.5 kbit/s840D 187.5 kbit/s840D 1.5 Mbit/sDate:9/1/2024File:09_PLC_Interface 17SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and Drives建立一个建立一个S7项目项目Enter project name here and confirmwith "OK"Date:9/1/2024File:09_PLC_Interface 18SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and Drives保存保存PLC程序程序810D840DDate:9/1/2024File:09_PLC_Interface 19SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and Drives管理器的用户化选项管理器的用户化选项Date:9/1/2024File:09_PLC_Interface 20SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and DrivesWindows 95 SymbolsSIMATIC管理器中的工具条管理器中的工具条STEP 7 Symbols 显示可访问的接点S7 储存器卡下载（到PLC）定义过滤器选择的过滤器仿真模块 (S7-PLCSIM)Date:9/1/2024File:09_PLC_Interface 21SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and Drives调用调用“模块信息模块信息”工具工具SIMATIC ManagerLAD/STL/FBD EditorModule InformationDate:9/1/2024File:09_PLC_Interface 22SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and Drives调用调用“监视监视/修改变量修改变量”工具工具Date:9/1/2024File:09_PLC_Interface 23SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and Drives显示参考数据显示参考数据Date:9/1/2024File:09_PLC_Interface 24SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and DrivesÜbung: Sichern des PLC-ProgrammesDate:9/1/2024File:09_PLC_Interface 25SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and DrivesÜbung: Alarm- und MeldetexteDate:9/1/2024File:09_PLC_Interface 26SINUMERIKSiemens AG 2000. All rights reserved.SITRAIN Training for Automation and Drives。