锂电池空运申明.docx

关于锂电池Section II空运随附声明运单号： 警告：因为安全隐患原因而被厂家召回的锂电池禁止空运本包装件内含有如下所列的锂电池或电池芯（检查是否使用），电池/芯巳通过了联合国《危险品运输建议-实验与标准手册》 第38.3章节测试，该锂电池的生产符合了 IATA《危险品规则》3.9.2.6（e）中规定的质量管理程序被测试的包装件能够承受1.2米跌落试验（除PI967和PI970外）锂离子电池.・每个电池芯能量不超过20瓦时；且・每个电池芯能量不超过100瓦时锂金属电池.・ 每个电池芯含量不超过1克；且・每个电池锂含量不超过2克口 纯运输电池或电池芯（ICAO/IATA包装说明965，Section II）—包装件内只有电池或电池芯，没有设备包装件限量：<2.7Wh=2.5kg ；或>2.7Wh but <20Wh=8 电池芯；或>2.7Wh but <100Wh=2 电池口 纯运输电池或电池芯（ICAO/IATA包装说明968， Section II）—包装件内只有电池或电池芯，没有设备 包装件限量：<0.3g=2.5kg ；或>0.3 g but < 1 g=8 电池芯；■或>0.3 g but < 2 g=2 电池口 纯运输电池或电池芯（ICAO/IATA包装说明965，Section IB）一包装件内只有电池或电池芯，没有设备口纯运输电池或电池芯（ICAO/IATA包装说明968，Section IB）—包装件内只有电池或电池芯，没有设备口 和设备包装在一起（ICAO/IATA包装说明966，Section II）—电池或电池芯作为附件和电子设备包装在 一个包装件内口和设备包装在一起（ICAO/IATA包装说明969，1 Section II）一电池或电池芯作为附件和电子设备包装在一 个包装件内，该设备由电池驱动，且电池没有安装在设备 内。

口 安装在设备中（ICAO/IATA包装说明967, SectionII）—电池或电池芯安装在设备中口 安装在设备中（ICAO/IATA包装说明970，SectionII）—电池或电池芯安装在设备中. 应小心操作，如包装破损，有易燃危险性：. 如该包装件在运输中破损，在未确定内部物品状态前不能装载该包装件中的电池必须检查是否有损坏，只有确定电池完好无损且做好短路防护时才能再次包装它・ 如果需要更多包装中电池的信息，请联系以下 （号码需含国家区号）. 对于PI967/PI970，单个包装件内所含的锂电池芯和锂电池数量： 锂电池芯（和/或）锂电池 我公司特别声明：巳遵守有关空运规则，包括国际和国内法规 （✓ ）巳在货物外包装上粘贴锂电池操作标签（ ）或货物外包装上无需粘贴锂电池操作标签（ ）巳按要求在合成包装件上注明“OVERPACK”字样 （ ）注意：请根据货物实际情况，在（ ）内打“/”托运人 名称/地址： 签名（正楷）/职务： 日期： 生产厂家盖章处 代理人盖章Declaration for Lithium Batteries section IIHAWB Number: WARNING:LITHIUM BATTERIES THAT HAVE BEEN RECALLED BY THE MANUFACTURER FORSAFETYREASOS MUSTNOT BE SHIPPED BY AIR.The Lithium cell/battery is of the type proven to meet the requirement of each test in the UN Manual of Tests and Criteria, Part III, subsection38.3. And is manufactured under a quality managements program according to DGR 3.9.2.6(e).the tested package is capable of with standing a.1.2m drop test in any orientation(except PI967&PI970)Lithium Ion-Maximum of• 20Watt-hours per cell; and• 100Watt-hours per batteryLithium Metal- Maximum of• 1 gram of lithium meta l per cell; and• 2 gram of lithium per battery口 Cells or batteries on4y(ICAO/IATA Packing Instruction 965,Section ll)-Ce//sOr batteries in a package, without e/ectronic equipmentPackage Limit:<2.7Wh=2.5kg； or>2.7Wh but <20Wh=8 cells； or>2.7Wh but <100Wh=2 batteries口 Cells or batter only(ICAO/IATA Packing lnstruction968,Section ll)-Cells or batteries in a package, without electronic equipmentPackage Limit:<0.3g=2.5kg； or>0.3 g but < 1 g=8 cells； or>0.3 g but < 2 g=2 batteries口 Cells or batteries on4y(ICAO/IATA Packing Instruction 965,Section IB)-Cells or batteries in a package, without e/ectronic equipment口 Cells or batter only(ICAO/IATA Packing lnstruction968,Section lB)-Cells or batteries in a package, without electronic equipment□ Packed-with-equipment(ICAO/IATA Packing lnstruction966,Section ll)-Cells or batteries contained in a package with associated electronic equipment口 Packed-wfthequ4pment(ICAO/IATA Packing lnstruction969,Section ll)- Cellsor batteries contained in a package with associated battery-powered equipment-with The batteries not installed in the equipment口 Contained-in-eqwipmeHt(ICAO/IATA Packing Inst ruction 967,Section ll)-CellsOr batteries in stalled in equipment□ Contained-inequ4pment(ICAO/IATA Packing Inst ruction 970,Section ll)-Cells Or batteries in stalled in equipment• This package must be handled with care. A flammability hazard exists if the package is damaged.• If this package is damaged in transportation, it must not be loaded until the condition of the contents can be verified. The batteries contained in this package must be inspected for damage and may only be repacked if they are intact and protected against short circuits• For more information about the batteries contained in this package, call the following telephone number.• To PI967/970,how many cells or batteries in each package: Cells (and/or) batteries• I hereby declare thatAll of the applicable air transport requirements including applicable international and national governmental regulations have been met. ( ✓)The “lithium battery handing label” has been labeled on each package ( )or not need affix “lithium battery handing label” ( )The word “over pack” has been marked on the outside of the over pack ( )Attention： Please insert “✓ ” In brackets according to the actual shipmentName/Address of shipper:Signature(block letter) /Title:-Manufacturer Seal Date: Agency Seal。