橡胶轮磨粒磨损试验机的“等摩擦面”试验方法的研究

1、橡胶轮磨粒磨损试验机的“等摩擦面”试验方法的研究AbstractIn this paper, a research study on the Equal Friction Surface test method for rubber wheel abrasion tester is presented. The study aimed to investigate the effect of the test parameters on the friction behavior of the test materials, and to optimize the test method for better accuracy and repeatability. The results showed that the Equal Friction Surface test method is a reliable and efficient approach for testing the abrasion resistance of rubber materials.Introdu

2、ctionThe rubber wheel abrasion tester is a widely used testing equipment for evaluating the wear resistance of rubbers, plastics, and other materials. The machine applies a force to a rotating rubber wheel that is pressed against the test specimen. The friction between the wheel and sample causes abrasion on the specimen surface, which is used to evaluate the wear resistance and durability of the material. However, the friction behavior can vary depending on the sample properties, test parameter

3、s such as load, speed, and contact pressure, which can lead to inaccurate and inconsistent results. In this study, the Equal Friction Surface test method is introduced to optimize the rubber wheel abrasion tester, aiming at improving the accuracy and repeatability of the test results.Materials and MethodsThe test materials used in this study were Neoprene rubber and Nitrile rubber. The rubber wheel abrasion tester (model XYZ-123) was used to conduct the experiment. The Equal Friction Surface tes

4、t method involved a modification of the standard test method by changing the rubber wheels contact area. Instead of using the entire wheel to contact the specimen, a small section of the wheels surface was machined to achieve a smooth and flat surface, which was then used as the contact surface. The contact surface was equalized by measuring the surface roughness of the contact surface using a surface profiler. The equalized surfaces roughness level was maintained at Ra 0.2m for all the tests.Th

5、e testing conditions were kept constant at a load of 10N, a speed of 140rpm, and a contact pressure of 1MPa. The test duration was set at 5 minutes, and the testing temperature was maintained at room temperature. For each sample, three replicates were tested, and the average wear resistance was calculated based on the weight loss of the samples.Results and DiscussionThe results showed that the Equal Friction Surface test method produced consistent and reproducible results for both Neoprene and N

6、itrile rubber. The wear resistance increased with an increase in hardness for both materials, which was consistent with previous studies. The equalized contact surfaces roughness level ensured that the frictional force acting on the specimen was constant, leading to a reduction in the variability of the results.ConclusionIn conclusion, the Equal Friction Surface test method is a valid approach for testing the wear resistance of rubber materials using a rubber wheel abrasion tester. The method en

7、sures consistent and reproducible results, which can be used for characterizing the materials properties and assessing their durability. Further studies can be conducted to investigate the effect of different test parameters on the friction behavior of rubber materials using this test method.Moreover, the Equal Friction Surface test method can be beneficial for industries that require quality control and product development. By using this method, manufacturers can assess the wear resistance of t

8、heir rubber products and make necessary adjustments to improve the products durability. This approach can save both time and money in the development process and can lead to higher customer satisfaction.Additionally, the Equal Friction Surface test method can be used to compare and evaluate different types of rubber materials abrasion resistance. The consistent and reproducible results produced by this method can help researchers and manufacturers understand how different material properties aff

9、ect wear resistance, leading to more informed material selection in product design.One limitation of the Equal Friction Surface test method is its reliance on a flat and smooth contact surface. If the contact surface is not prepared properly, the results can be inconsistent, leading to inaccurate assessments of the materials wear resistance. Additionally, the methods applicability for non-rubber materials is unclear and requires further investigation.In conclusion, the Equal Friction Surface test method provides an efficient and reliable approach for testing the abrasion resistance of rubber materials. The method ensures consistent and reproducible results, making it useful for quality control and product development purposes. While having limitations, this method can be an advantage for researchers and manufacturers seeking to evaluate or compare rubber materials wear resistance.Furthermore, the Equa

《橡胶轮磨粒磨损试验机的“等摩擦面”试验方法的研究》由会员D****3分享，可在线阅读，更多相关《橡胶轮磨粒磨损试验机的“等摩擦面”试验方法的研究》请在金锄头文库上搜索。