genesis菜单中汉文.doc

Upper Side 顶层Lower Side 底层Annular Ring 焊环Adapter Coordinates 夹具坐标Board Coordinates 线路板坐标Select in Area 区域选择Select Net in Area 区域内选择网络Top Left 左上Top Middle 中上Top Right 右上Middle Left 中间偏坐Center 中心Middle Right 中间偏右Bottom Left 底部左侧Bottom Middle 底部中心Bottom Right 底部右侧Control Panel 控制面板Drill Filter 钻空过滤End Point 结束点Execute Stage 执行步骤Execute Stage 执行步骤Layer Popup 层Layer Popup - Lower Side Display 层 - 底层显示Layer Popup - Upper Side Display 层 - 顶层显示Mid Point 中间点Pad Filter 结束点Snap Drill Center 抓取钻孔中心Snap Drill Edge 抓取钻孔边缘Snap Pin Center 抓取针中心Snap Pin Edge 抓取针边缘Add Alignment Point 加对位点Add Tooling Pin 加工具针Add Compensation Posts 加补偿Delete Alignment Point 删除对位点Delete Net 删除网络Delete Tooling Pin 删除工具针Move Net to Another Split 将网络移动到另一套夹局里Move Test Point on Pad 移动测试点到盘上Output 输出Assign Pin to Grid 将针指到网格上Delete Pin-Grid Assignment 删除针与网格的连接Optimal Test Point Position 优化测试点位置Assign Pin to Pad 将针指向盘Delete Pin-Pad Assignment 删除针于盘的连接3D Distance Between Pins 针间的立体空间Select 选择 Select Net 选择网络Move Pin on Pad 将针移到盘上Stagger Points in a Row 在一列中错针Stagger - Double 错针No Staggering 无错针Stagger - Triple1 错针--三个一组Stagger - Triple2Test On Solder Side 在焊盘面测试Do Not Test 不测试Test On Component Side 在组件面测试Through Hole Balance 通孔平衡Add Location Pin 加平衡针Remove Location Pin 删除平衡针Highlight Net-points and Features 亮显网络点和实体Zoom In 放大Zoom Out 缩小Bottom left corner 左下方角Left center 左侧中心Top right corner 右上方角Bottom center 底侧中心Center 中心Top center 上侧中心Bottom left corner 左下方角Right center 右侧中心Top right corner 右上方角 Select note 选择注释Move note 移动注释Delete note by mouse 删除注释Copy note 拷贝注释Add new note 添加注释Delete note from the list 从列表中删除注释Delete all notes from the list 从列表中删除所有注释Select single step 单独 step 选择Select steps by rectangle 长方形区域选择 step Select steps by polygon 多边形区域选择 step Add step 加 stepDelete steps 删除 stepCopy steps 拷贝 stepMove steps 移动 stepReplace steps 替换 stepRotate steps 旋转 stepMirror horizontally 水平镜像Mirror vertically 垂直镜像Flip steps 翻转 stepModify step 修改 stepReduce S&R nesting 简化拼板 Pack left 左对齐Pack right 右对齐Pack top 上对齐Pack bottom 下对齐Pack left and right 分别向左右对齐Pack top and bottom 分别向上下对齐Pack to center vertically 中心垂直对齐Pack to center horizontally 中心水平对齐Align Left 左对齐Align Right 右对齐Align Top 上对齐Align Bottom 下对齐Center on Y axis y 轴对中心Center on X axis x 轴对中心Align to grid 对准网格Space evenly 水平均分Space evenly 垂直均分Set Active Area Margins 设定有效区域范围Open S&R Table Popup 开启拼板表Help 帮助Run globally 全局运行Run on features on screen only 当前显示区域内运行 Run on features inside profile profile 区域内运行View results 查看结果Copy to buffer 拷贝到缓冲区 Add reference point 加参考点Add dimension link 加辅助线Edit dimension link 编辑辅助线Delete dimension link 删除辅助线Connect reference points 连接辅助点Erase all dimentions 删除所有辅助线Calculate value 等于Hide Dlines 隐藏线Hide Dpoints 隐藏点Hide dimensions links 隐藏连接Hide angle dimensions 隐藏角度Hide distance indications 隐藏距离显示Intersection 交叉Circle tangent to lines 圆相切线Line tangent to circles 线相切圆Arc tangent to circles 弧相切圆Arc tangent to line and circle 弧相切线和圆Create chain 产生链接Insert features to chain 链接中加入实体Merge chains 合并链接Split chain 分离链接 Delete chains 删除链接Change chain direction 修改链接方向Change chain number 修改链接顺序Change parameters 修改参数Set plunge 设置加入链接Set pocket 设置口袋Set pilot holes 设置导引孔Straight intersection 直连Chamfered intersection 切线连接Overlapped round intersection 用圆相连Wrap-around corner 圆形环绕Deflected exit 偏转Straight 拉直Overlap 相迭加Arcs 弧Deflected by distance 根据距离偏移 Deflected by angle 根据角度偏移Delete 删除Concentric 同心Delete 删除Round 圆形Square 正方形Rectangle 长方形Rectangle with round corners 圆角长方形Rectangle with champhered corners 切角长方形Oval 椭圆形Diamond 菱形Octagon 八角形Round Donut 空心圆Square Donut 空心方Laying Hexagon 趟着的六边形Standing Hexagon 立着的六边形Round Butterfly 圆形蝴碟形Square Butterfly 方形蝴碟形Triangle 三角形Half oval 半椭圆Round/Round Thermal 圆花焊盘Square/Square Thermal 方花焊盘Square/Round Thermal 方/圆花焊盘Rect/Rect Thermal 长方花焊盘Ellipse 安街 椭圆形Moire 波纹形Hole 孔Null 空Pan up 平铺放大Pan down 平铺缩小 Pan left 平铺向左Pan right 平铺向右Zoom home 全景Pan to coordinate 平铺到指定坐标Previous zoom 前一级缩放Snake through step 蛇形移动Zoom in 放大Zoom out 缩小Specify zoom factor 指定缩放比例Feature selection filter 实体过滤选择编辑器控制Control snapping 捕捉控制Online netlist 网络Online DRC 设计规则检测A。