Safety Operation Procedure for OMGA T50-350

斜 断 锯 安 全 操 作 规 程 培 训 OMGA T50－350 Machine Safety Operation Procedure Training Model: OMGA T50-350 Dept.: Frame Cutting 1. Only authorized personnel can operate the equipment。 2. Operation machine must follow all safety operating rules, to wear protective glasses, ear plugs, gloves, safety shoes, etc. 3. The operator shall not wear jewelry, such as: tie, watches, rings, etc., sleeve to roll up, long hair to dish up and wear a hat 4. The operator must always alert, concentration。。 5. Before operating to check all operating lever and saw blade on both sides of the activities to protect tablet is effective in good condition 6. The machine work, never allowed to mobile saw blade part 7. Machines and dust collection system (21 m/s) connection are in good condition 8. Machine dust collection system is effective work, the grounding wire loop is effective 9. Machine maintenance, cleaning and replace knife saw, must cut off power supply, and at the same time, posted reminder label, to prevent accidental starting machine and accident 10. Timely clean wood on the ground, otherwise ground easy slippage 11. The machine should be placed next to fire extinguishing device, once produce fireworks, shall be immediately closed dust collection system and switch valve, timely put out fire 12. Suggest near the machine placed first aid equipment, such as disinfectant, etc.。 13. Any equipment failure, please inform your supervisor Name: Badge: has accepted the safety operation training for OMGA T50-350, and know the operation procedure for this machine and confirm will abide standard operation procedure strictly. Trainer: Date: 2/21/2023 - 1 -