威士伯汽车油漆介绍与使用.ppt

HISTORY OF DE BEER德倍尔德倍尔( (De BeerDe Beer) )的历史的历史 n n1910 trade company1910 trade company 开始组建贸易公司开始组建贸易公司n n1950 own production plant1950 own production plant 拥有自己的制造工厂拥有自己的制造工厂n n1980 mixing systems series 200 & 4001980 mixing systems series 200 & 400 n n 混合系统混合系统200&400200&400系列问世系列问世n n1988 mixing system series 5001988 mixing system series 500 混合系统混合系统500500系列问世系列问世n n1996 first water & HS products1996 first water & HS products 开发第一代出水性及开发第一代出水性及HSHS产品产品n n1999 mixing systems water & HS1999 mixing systems water & HS 开发出混合水性及开发出混合水性及HSHS系统产品系统产品n n2001 independent company 2001 independent company 设立独立的公司设立独立的公司Product Groups产品n n1.0 cleaners1.0 cleanersn n 清洁剂清洁剂n n2.0 putties2.0 puttiesn n 原子灰原子灰n n3.0 primers3.0 primersn n 底漆底漆n n4.0 fillers/4.0 fillers/surfacerssurfacersn n 中涂漆中涂漆n n5.0 top coats5.0 top coatsn n 面漆面漆n n6.0 clear coats6.0 clear coatsn n 清漆清漆n n7.0 hardeners7.0 hardenersn n 固化剂固化剂n n8.0 thinners8.0 thinnersn n 稀释剂稀释剂n n9.0 additives9.0 additivesn n 添加剂添加剂1.0 CLEANERS 1.0 CLEANERS 清洁液清洁液1.1 1.1 Degreasing AgentDegreasing Agent 1-9511-951 脱脂清洁剂脱脂清洁剂1.2 1.2 Antistatic DegreaserAntistatic Degreaser 1-8511-851 抗静电清洁剂抗静电清洁剂1.3 1.3 Degreasing Agent Water baseDegreasing Agent Water base 9-851 9-851 水性去油污剂水性去油污剂1.41.4Gun cleaner Water baseGun cleaner Water base 9-8529-852 喷枪清洁剂喷枪清洁剂------水性水性2.0 PUTTIES 腻子n n 2.1 universal polyester PUTTY 2.1 universal polyester PUTTY 1.900 1.900 n n 通用原子灰通用原子灰n n 2.2 polyester PUTTY fine 2.2 polyester PUTTY fine1.910 1.910 n n 幼细原子灰幼细原子灰n n 2.3 standard polyester PUTTY 2.3 standard polyester PUTTY 1.930 1.930 n n 标准原子灰标准原子灰n n 2.4 polyester glass FIBRE PUTTY 2.4 polyester glass FIBRE PUTTY 1.9401.940n n 玻璃纤维原子灰玻璃纤维原子灰n n 2.5 polyester PUTTY soft 2.5 polyester PUTTY soft1.9601.960 柔韧原子灰柔韧原子灰n n 2.6 polyester PUTTY ALUMINIUM 2.6 polyester PUTTY ALUMINIUM 1.9701.970n n 铝合金原子灰铝合金原子灰n n 2.7 polyester spray-filler 2.7 polyester spray-filler1.9801.980 原子灰喷灰原子灰喷灰n n 2.8 NC car filler 2.8 NC car filler6-0226-022n n 填眼灰填眼灰 3.0 PRIMERS 底漆3.1 3.1 Wash PrimerWash Primer1-151-15 防侵蚀底漆防侵蚀底漆3.2 3.2 Wash Primer CHWash Primer CH 1-17 1-17 磷化磷化底漆底漆CHCH3.3 3.3 Epoxy PrimerEpoxy Primer1-751-75 环氧底漆环氧底漆3.4 3.4 1K Acrylic Primer1K Acrylic Primer1-361-36 单组份底漆单组份底漆3.5 3.5 Plastic PrimerPlastic Primer1-60 1-60 塑料底漆塑料底漆3.1 WASH PRIMER 1-153.1 WASH PRIMER 1-15 磷化底漆磷化底漆1-151-15FEATURES & BENEFITS 特性和优点q Good Adhesion on bare metal and zinc on passenger cars. 在镀锌板和钢板上有极佳的附着力q Short flash off time 表干时间特短q Good rust protection 可作为面漆４００及７００系列的基层底漆使用3.1.1 WASH PRIMER 1-153.1.1 WASH PRIMER 1-15 磷化底漆磷化底漆1-151-151:1 with Was1:1 with Wash hprimer Activator 1-10primer Activator 1-10 以以1:11:1与防侵蚀底漆固化剂与防侵蚀底漆固化剂1-101-10混合混合1- 2 layer1- 2 layer 喷喷1~21~2层层1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction Feed1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction Feed 可适用于重力型上壶喷枪可适用于重力型上壶喷枪:1.3~1.5 / :1.3~1.5 / 吸力型下壶喷枪吸力型下壶喷枪:1.6~1.8:1.6~1.8Flash-off time: 10 – 15 minutesFlash-off time: 10 – 15 minutes 闪干时间闪干时间: 10~15: 10~15分钟分钟 Drying time Drying time 3030 minsmins. at 60°C / 2 hrs at 20. at 60°C / 2 hrs at 20°C°C 干燥时间干燥时间: 60: 60°C°C干燥干燥3030分钟分钟 / / 2020°C°C干燥干燥2 2小时小时3.2 WASH PRIMER CH 1-173.2 WASH PRIMER CH 1-17 磷化底漆磷化底漆CH 1-17CH 1-17FEATURES & BENEFITS 特性和优点q Good Adhesion on difficult substrates like aluminium and other non Ferro metals. Used on commercial vehicles 在不锈钢，铝合金等金属表面上具极佳的附着力，特别适合用于商用车 和飞机板材q Contains Chrome-mate 含有铬酸盐q Slow flash off for large objects or high temperatures 由于表干比较慢特别适用于大面积和温度较高的环境下施工3.2.1 WASH PRIMER 1-173.2.1 WASH PRIMER 1-17 磷化底漆磷化底漆1-171-171:1 with Was1:1 with Wash hprimer Activator 1-12primer Activator 1-12以以1:11:1与防侵蚀底漆固化剂与防侵蚀底漆固化剂1-121-12混合混合1 1 – – ３３ layerlayer 可选择施喷１涂层为防锈底漆／３涂层为中涂可选择施喷１涂层为防锈底漆／３涂层为中涂1.1.３３ – 1.– 1.５５ Gravity Feed / 1.6 – 1.8 Suction FeedGravity Feed / 1.6 – 1.8 Suction Feed　　　　　　　　　　　　　　　　　　　　　　可适用可适用: :重力型上壶喷枪重力型上壶喷枪 1.1.３３~1.~1.５５/ / 吸力型下壶喷枪吸力型下壶喷枪:1.6~1.8:1.6~1.8Flash-off time: Flash-off time: １０－１５１０－１５minutesminutes闪干时间闪干时间: :１０－１５分钟１０－１５分钟Drying time: Drying time: ３０３０ min. at 60°C. / 2 hrs. at 20° C.min. at 60°C. / 2 hrs. at 20° C.干燥时间干燥时间:60:60°C°C干燥３０分钟干燥３０分钟 / 20/ 20°C°C干燥干燥2 2小时小时3.3 Epoxy Primer 1-753.3 Epoxy Primer 1-75 环氧底漆环氧底漆1-751-75FEATURES & BENEFITS 特性与优点q Good Adhesion on difficult substrates like galvanised & stainless steel, etc.对不同金属板材上都具有极佳的附着力如：铝合金，不锈钢，玻璃纤维板材q Good rust protection 良好的防腐，防锈能力q Polyester putties can be applied on top 如采用1-17040特快干ＥＰ固化剂，原子灰可直接使用在已干的漆面上3.3.1 Epoxy Primer 1-753.3.1 Epoxy Primer 1-75 环氧底漆环氧底漆1-751-75~ ~ 2:1 with 2:1 with Epoxy HardenerEpoxy Hardener 1-70 1-70. For wet-on-wet use add 20-25% . For wet-on-wet use add 20-25% UniUni Thinner Thinner 以以2:12:1调配，使用１－７０／调配，使用１－７０／1-7040EP1-7040EP固化剂固化剂. . 当湿对湿喷涂时当湿对湿喷涂时, ,需加２５需加２５ - -３０３０%%ＵＵＮＩ稀释剂ＮＩ稀释剂. .1 layer for a wet-on-wet system / 3 layers for a filler1 layer for a wet-on-wet system / 3 layers for a filler可选择湿对湿可选择湿对湿1 1喷涂层或中涂漆的３涂层喷涂层或中涂漆的３涂层1.3–1.7 Gravity Feed / 1.6–1.8 Suction Feed 1.3–1.7 Gravity Feed / 1.6–1.8 Suction Feed 可适用于重力型上壶喷枪可适用于重力型上壶喷枪 1.3~1.71.3~1.7 / / 吸力型下壶喷枪吸力型下壶喷枪:1.6-2.0:1.6-2.0Flash-off time: 45 - 60 minutes wet-on-wetFlash-off time: 45 - 60 minutes wet-on-wet每涂层相隔时间每涂层相隔时间: :湿对湿喷涂需湿对湿喷涂需45~6045~60分钟，选择为中涂层用分钟，选择为中涂层用10-1510-15分钟分钟Drying time: 60 min. at 60°C. / 24 hrs. at 20°C.Drying time: 60 min. at 60°C. / 24 hrs. at 20°C.干燥时间干燥时间:60:60°C°C干燥干燥6060分钟分钟 / 20/ 20°C°C干燥干燥2424小时小时3.5. Plastic Primer 1-603.5. Plastic Primer 1-60 塑料底漆塑料底漆1-601-60FEATURES & BENEFITS 特性和优点q Ready for use 可直接使用q Unlimited pot life 无限制使用时间q Fast drying 快干q Good adhesion on most plastics 能与大部分塑料有较优良的附着性能3.5.1 Plastic Primer 1-603.5.1 Plastic Primer 1-60 塑料底漆塑料底漆1-601-60Ready for usReady for use e可直接使用可直接使用1 thin layer.1 thin layer.只需喷只需喷1 1薄层薄层1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction Feed1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction Feed适用于适用于: :重力型上壶喷枪重力型上壶喷枪 1.1.３３~1.~1.５５ / / 吸力型下壶喷枪吸力型下壶喷枪:1.6~1.8:1.6~1.8Flash-off time: until mattFlash-off time: until matt. .每涂层相隔时间：表面呈哑光状每涂层相隔时间：表面呈哑光状4.0 FILLERS / SURFACERS 中涂漆4.1 4.1 2K 2K SurfacerSurfacer1-471-47 2K 2K 中涂中涂4.5 4.5 HS HS SurfacerSurfacer 8-1458-145 HSHS 高浓度中涂高浓度中涂4.2 4.2 MS Filling PrimerMS Filling Primer1-1461-146 MS MS 4-14-1中涂；杏．灰色中涂；杏．灰色4.3 4.3 Non Sanding FillerNon Sanding Filler 1-7461-746 免磨中涂免磨中涂4.4 4.4 HS Non Sanding FillerHS Non Sanding Filler 30-74630-746 HS HS 免磨中涂免磨中涂4.64.6HS Tinting HS Tinting SurfacerSurfacer 8-1498-149 HS HS 高浓度调色中涂高浓度调色中涂4.1 2K Surfacer 1-474.1 2K Surfacer 1-47 2K 2K 中涂中涂1-471-47FEATURES & BENEFITS 特性和优点q Cost effective filler 填充力强，易打磨q Fast curing 快干4.1.1 2K Surfacer 1-474.1.1 2K Surfacer 1-47 2K 2K 中涂中涂1-471-474:1 with 2K or MS Hardener4:1 with 2K or MS Hardener以以4:14:1与与2K2K或或MSMS固化剂混合固化剂混合２２ – – ３３ layerslayers喷２喷２~ ~３层３层1.6 – 1.8 Gravity Feed / 1.6 – 1.8 Suction Feed1.6 – 1.8 Gravity Feed / 1.6 – 1.8 Suction Feed适用于适用于: :重力型上壶喷枪重力型上壶喷枪 1.6~1.1.6~1.吸力型下壶喷枪吸力型下壶喷枪:1.6~1.8:1.6~1.8Flash-off time: until mattFlash-off time: until matt涂层间隔时间涂层间隔时间: :表面呈亚光约表面呈亚光约1010分钟分钟Drying time: Drying time: 3030 min. at 60°C. / min. at 60°C. / 8 8hrs. at 20°C.hrs. at 20°C.干燥时间干燥时间: 60: 60°C°C干燥干燥3030分钟分钟 / 20/ 20°C°C干燥干燥8 8小时小时4.2 MS Filling Primer 1-1464.2 MS Filling Primer 1-146 MS 4-1MS 4-1中涂中涂1-1461-146FEATURES & BENEFITS 特性和优点q Good film build 极佳的厚膜层q Fast drying 快干q Good enamel hold out 极佳封密性，易打磨4.2.1 MS Filling Primer 1-1464.2.1 MS Filling Primer 1-146 MS MS 4-14-1中涂中涂1-1461-1464:1 with 2K or MS Hardener4:1 with 2K or MS Hardener以以4:14:1与与2K2K或或MSMS固化剂混合固化剂混合2 – 2 – 3 3 layers layers喷喷2~32~3层层1.6 – 1.8 Gravity Feed / 1.6 – 1.8 Suction Feed1.6 – 1.8 Gravity Feed / 1.6 – 1.8 Suction Feed适用于适用于: :重力型上壶喷枪重力型上壶喷枪 1.1.６６~1.8 / ~1.8 / 吸力型下壶喷枪吸力型下壶喷枪:1.6~1.8:1.6~1.8Flash-off time: until mattFlash-off time: until matt涂层间隔时间涂层间隔时间: :表面呈亚光约表面呈亚光约1010分钟分钟Drying time: 30 min. at 60°C. / 6 hrs. at 20°C.Drying time: 30 min. at 60°C. / 6 hrs. at 20°C.干燥时间干燥时间: 60: 60°C°C干燥干燥3030分钟分钟 / 20/ 20°C°C干燥干燥6 6小时小时4.3 Non Sanding Filler 1-7464.3 Non Sanding Filler 1-746 免磨中涂免磨中涂1-7461-746FEATURES & BENEFITS 特性和优点q Saving labour 节省人工q Very smooth surface 极其平滑的漆面q Good film build 极佳饱满度q Easy to use 施喷简单4.3.1 Non Sanding Filler 1-7464.3.1 Non Sanding Filler 1-746 免磨底漆免磨底漆1-7461-7464:1:1 with 2K or MS Hardener and Thinner4:1:1 with 2K or MS Hardener and Thinner以以4:1:14:1:1与与2K2K固化剂和稀释剂混合固化剂和稀释剂混合1 layer1 layer1 1喷涂层喷涂层1.4 – 1.6 Gravity Feed / 1.6 – 1.8 Suction Feed1.4 – 1.6 Gravity Feed / 1.6 – 1.8 Suction Feed适用于适用于: :重力型上壶喷枪重力型上壶喷枪 1.4~1.6 / 1.4~1.6 / 吸入型下壶喷枪吸入型下壶喷枪:1.6~1.8:1.6~1.8Flash-off time: app. 20 min Flash-off time: app. 20 min 涂层间隔时间涂层间隔时间: : 约约15-2015-20分钟分钟 Drying time: 30 min. at 60°C.Drying time: 30 min. at 60°C.干固时间干固时间: 60: 60°C°C干燥干燥3030分钟或分钟或20c20c干燥干燥8 8小时小时4.4 HS Non Sanding Filler 30-7464.4 HS Non Sanding Filler 30-746 HS HS 免磨底漆免磨底漆30-74630-746FEATURES & BENEFITS 特性和优点q Compliant Product　 VOC合符有害物排放要求q Saving material 遮盖力强q Excellent flow 极佳的流平性q Good film build 优良的饱满度q Slow flash off 表面干固时间较慢q Good enamel hold out 极佳的封密性4.4.1 HS Non Sanding Filler 30-7464.4.1 HS Non Sanding Filler 30-746 HSHS免磨中涂免磨中涂30-74630-7464:1:1 with HS topcoat hardener / 4:1:1 with HS topcoat hardener / uniuni thinner thinner以以4:1:14:1:1与与HSHS面漆固化剂和通用型稀释剂混合面漆固化剂和通用型稀释剂混合1 layer1 layer喷喷1 1层层1.4 – 1.6 Gravity Feed / 1.6 – 1.8 Suction Feed1.4 – 1.6 Gravity Feed / 1.6 – 1.8 Suction Feed适用于：重力型上壶喷枪适用于：重力型上壶喷枪 ：：1.4~1.61.4~1.6　　/ /　吸力型下壶喷枪　吸力型下壶喷枪1.6~1.81.6~1.8Flash-off time: app.45 min / max 8hrs. at 20°CFlash-off time: app.45 min / max 8hrs. at 20°C闪干时间闪干时间: : 约约4545分钟／分钟／ 2020°C°C下最多需下最多需8 8小时小时Drying time: 30 min. at 60°C. Drying time: 30 min. at 60°C. 干燥时间干燥时间: 60: 60°C°C干燥干燥3030分钟分钟4.5 HS Surfacer 8-1454.5 HS Surfacer 8-145 HS HS 高浓度中涂高浓度中涂8-1458-145FEATURES & BENEFITS 特性和优点q Compliant Product voc合符有害物排放要求q Fast drying 快干q Easy to sand 易打磨q Good film build 极佳的厚膜层q Good enamel hold out 极佳封密性4.5.1 HS Surfacer 8-1454.5.1 HS Surfacer 8-145 HS HS 高浓度中涂漆高浓度中涂漆8-1458-1453:1 with 2K or MS Hardener3:1 with 2K or MS Hardener3:13:1调配比，使用调配比，使用MSMS固化剂固化剂47/5547/55及及5%uni5%uni稀释剂稀释剂2 - 3 layer2 - 3 layers s喷喷2~32~3层层1.6 – 1.8 Gravity Feed / 1.6 – 1.8 Suction Feed1.6 – 1.8 Gravity Feed / 1.6 – 1.8 Suction Feed适用于适用于: :重力型上壶喷枪：重力型上壶喷枪：1.6~1.8 / 1.6~1.8 / 吸力型下壶喷枪吸力型下壶喷枪1.81.8Flash-off time: until mattFlash-off time: until matt涂层间隔时间涂层间隔时间: :表面呈亚光状约表面呈亚光状约1010分钟分钟Drying time: 30 min. at 60°C. / 6 hrs. at 20°C.Drying time: 30 min. at 60°C. / 6 hrs. at 20°C.干固时间干固时间:60:60°C°C干燥干燥3030分钟分钟 / 20/ 20°C°C干燥干燥6 6小时小时4.6 HS Tinting Surfacer4.6 HS Tinting Surfacer 1-149 1-149 HS HS 高浓度调色中涂高浓度调色中涂1-1491-149FEATURES & BENEFITS 特性和优点q Saving time and material during application of Top Coats 可有效节省施喷时间及降低面漆使用量q Avoids visual stone chips 有效减少面漆因石击而做成露底的情况q Good enamel hold out 绝佳的封密性4.6.1 HS Tinting Surfacer 8-1494.6.1 HS Tinting Surfacer 8-149 HSHS高浓度调色中涂高浓度调色中涂8-1498-1493:1 With series 400 mix this again 3:1 with 2K or MS Hardener3:1 With series 400 mix this again 3:1 with 2K or MS Hardener以以3:13:1调色比加入与调色比加入与400400系列列混合系列列混合, , 再用再用3:13:1与与2K2K固化剂混合固化剂混合2 – 3 layers2 – 3 layers喷喷2~32~3层层1.3 – 1.6 Gravity Feed / 1.6 – 1.8 Suction Feed1.3 – 1.6 Gravity Feed / 1.6 – 1.8 Suction Feed适用于重力型上壶喷枪适用于重力型上壶喷枪 :1.3~1.6:1.3~1.6 / /吸力型下壶喷枪吸力型下壶喷枪1.6~1.81.6~1.8Flash-off time: until mattFlash-off time: until matt涂层间隔时间涂层间隔时间: :表面呈亚光状表面呈亚光状Drying time: 30 min. at 60°C. / 24 hrs at 20°C.Drying time: 30 min. at 60°C. / 24 hrs at 20°C.干燥时间干燥时间:60:60°C°C干燥干燥3030分钟分钟 / 20/ 20°C°C干燥干燥2424小时小时5.0 Topcoats 面漆5.1 5.1 SyntheticSynthetic Series 200Series 200 合成系列合成系列5.2 5.2 2K Acrylic2K Acrylic Series 400Series 400 2K 2K 单工序纯色面漆单工序纯色面漆5.3 5.3 BasecoatBasecoat Series 500Series 500 双工序金属漆双工序金属漆5.4 5.4 2K Polyurethane2K Polyurethane Series 700Series 700 2K 2K 聚氨酯聚氨酯(PU)(PU)系列系列5.5 5.5 HS 2K AcrylicHS 2K Acrylic Series 800 Series 800 HS 2K HS 2K 丙烯酸系列丙烯酸系列5.6 5.6 Water BasecoatWater Basecoat Series 900Series 900 水性涂料系列水性涂料系列5.7 5.7 HS 2K Polyurethane HS 2K Polyurethane Series 3000 Series 3000 HS 2K HS 2K聚氨酯聚氨酯(PU)(PU)系列系列5.1 5.1 Bero-SyntBero-Synt Series 200 Series 200 Bero-SyntBero-Synt 200 200系列系列FEATURES & BENEFITS 特性和优点q Compact range of tinters 色母种类紧凑q High Gloss 高光泽度q Air dry product 空气自干型产品q Quality based on car-refinish technology 依托汽车修补漆技术发展起来的高质量的产品5.1.1. 5.1.1. BeroSyntBeroSynt Series 200 Series 200 B BeroSynt200eroSynt200系列系列Add max. 25% of synthetic Thinner 23-51Add max. 25% of synthetic Thinner 23-51加入加入25%(25%(最多最多) )的合成稀释剂的合成稀释剂23-5123-512 – 3 layers2 – 3 layers喷喷2~32~3层层1.4 – 1.6 Gravity Feed / 1.6 – 1.8 Suction Feed1.4 – 1.6 Gravity Feed / 1.6 – 1.8 Suction Feed喷涂喷涂: :重力型喷枪重力型喷枪 1.4~1.6 / 1.4~1.6 / 吸入型喷枪吸入型喷枪 1.6~1.8 1.6~1.8Flash-off time: 10 – 15 minutesFlash-off time: 10 – 15 minutes闪干时间闪干时间: 10~15: 10~15分钟分钟Drying time: 1 hr. at 60°C. / 15 hrs at 20°C.Drying time: 1 hr. at 60°C. / 15 hrs at 20°C.干燥时间干燥时间:20:20°C°C下干燥下干燥1 1小时小时 / 20/ 20°C°C下干燥下干燥1515小时小时5.2 5.2 Bero-CrylBero-Cryl Series 400 Series 400 B Bero-Crylero-Cryl 400 400系列系列FEATURES & BENEFITS 特性和优点q Compact range of tinters 精简的调色色每q Small Stock 低库存量q High Gloss 光泽高，流平好．高饱满度q UV proof 具有抗紫外线性能5.2.1 5.2.1 BerocrylBerocryl Series 400 Series 400 B Berocrylerocryl 400 400系列系列2:1 with 2K / MS Hardener. 10-15% 2:1 with 2K / MS Hardener. 10-15% UniUni Thinner Thinner以以2:12:1与与2K/MS2K/MS固化剂混合固化剂混合, ,再添加再添加10~15%10~15%的通用型稀释剂的通用型稀释剂2 – 3 layers2 – 3 layers喷喷2~32~3层层1.4-1.51.4-1.5Gravity Feed / 1.6 – 1.8 Suction FeedGravity Feed / 1.6 – 1.8 Suction Feed可使用于重力型上壶喷枪可使用于重力型上壶喷枪 1.3~1.5 / 1.3~1.5 / 吸力型下壶喷枪吸力型下壶喷枪1.6~1.81.6~1.8Flash-off time: 10 – 15 minutesFlash-off time: 10 – 15 minutes每涂层相隔时间：约每涂层相隔时间：约10-15min10-15min分钟分钟Drying time 30 min. at 60°C – 12 hrs at 20°CDrying time 30 min. at 60°C – 12 hrs at 20°C干燥时间干燥时间: 60: 60°C°C干燥干燥3030分钟分钟 / 20/ 20°C°C干燥干燥1212小时小时 5.2 5.2 BeroBaseBeroBase series 500 series 500 BeroBaseBeroBase 500 500系列系列FEATURES & BENEFITS 特性和优点q Compact range of mixing colours 精简的调色色母q Easy to use 操作简单，施喷容易q Fast drying 表干快q Easy to mask for multi colour work 可使用于多线条喷涂工作q Large colour range 颜色种类多5.3.1 5.3.1 BeroBaseBeroBase serieserie 500 500 B BeroBaseeroBase 500500金属漆系列金属漆系列1:1 with 1:1 with UniUni Thinner 1-151 / 1-141 / 1-161 Thinner 1-151 / 1-141 / 1-161以以1:11:1与通用型稀释剂与通用型稀释剂1-151/1-141/1-1611-151/1-141/1-161混合混合2 – 3 layers finished with a dust coat2 – 3 layers finished with a dust coat喷喷2~32~3层层, , 最后一层以雾喷完成最后一层以雾喷完成1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction Feed1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction Feed喷涂喷涂: :重力型喷枪重力型喷枪1.3~1.5 / 1.3~1.5 / 吸入型喷枪吸入型喷枪1.6~1.81.6~1.8Flash-off time: 15 - 20 minutesFlash-off time: 15 - 20 minutes闪干时间闪干时间:15-20:15-20分钟分钟Drying time: Can be taped over after 30 minutesDrying time: Can be taped over after 30 minutes干燥时间干燥时间: :3030分钟后即可在漆面上进行贴纸工作分钟后即可在漆面上进行贴纸工作5.4 5.4 BeroBero-Thane Series 700-Thane Series 700 BeroBero-Thane 700-Thane 700系列系列FEATURES & BENEFITS 特性和优点q Compact range of mixing colours 紧凑的色母种类q Good covering 覆盖性能优良q Easy to use 使用操作方便q Slow flash off for large objects and high temperatures 缓慢的闪干时间,适合于大待喷物件和高温时喷涂5.4.1 5.4.1 BeroBero-Thane series 700-Thane series 700 Bero-Thane700Bero-Thane700系列系列2:1 With 2K / MS Hardener. 10% 2:1 With 2K / MS Hardener. 10% UniUni Thinner Thinner以以2:12:1与与2K/MS2K/MS固化剂混合固化剂混合. . 可加可加10%10%的通用性稀释剂的通用性稀释剂2 layers2 layers喷喷2 2层层1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction Feed1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction Feed喷涂喷涂: :重力型喷枪重力型喷枪1.3~1.5 / 1.3~1.5 / 吸入型喷枪吸入型喷枪1.6~1.8 1.6~1.8 Flash-off time: 15 - 20 minutesFlash-off time: 15 - 20 minutes闪干时间闪干时间: 15~20: 15~20分钟分钟Drying time: 45 min at 60°C. / 24 hrs. at 20°C.Drying time: 45 min at 60°C. / 24 hrs. at 20°C.干燥时间干燥时间:60:60°C°C下干燥下干燥4545分钟分钟 / 20/ 20°C°C下干燥下干燥2424小时小时5.6 Water Basecoat5.6 Water Basecoat series 900 series 900 水性涂料水性涂料900900系列系列FEATURES & BENEFITS 特性和优点q Compliant product 环保型产品(符合VOC标准)q Application similar to conventional basecoat 其应用与传统涂料相似q Good covering 优良的覆盖性q Environment friendly 对环境友好5.6.1 Water 5.6.1 Water BaseCoatBaseCoat series 900 series 900 水性涂料水性涂料900900系列系列10% water reducer as stated in colour formulations10% water reducer as stated in colour formulations依配方规定先加依配方规定先加10%10%的水稀释的水稀释2 wet layers, no flash off between layers. Finish with a dust layer2 wet layers, no flash off between layers. Finish with a dust layer直接喷直接喷2 2层层, ,在层与层之间无需晾干在层与层之间无需晾干. . 末道漆应喷一暗色漆层末道漆应喷一暗色漆层1.3 – 1.5 Gravity Feed 1.3 – 1.5 Gravity Feed HVLPHVLP喷涂喷涂: 1.3~1.5: 1.3~1.5重力型喷枪重力型喷枪HVLPHVLPFlash-off time: depends on humidity, air flow and temperatureFlash-off time: depends on humidity, air flow and temperature闪干时间闪干时间: : 依湿度依湿度, ,气流和温度而异气流和温度而异Depending on temperature and humidity.Depending on temperature and humidity.干燥时间干燥时间: : 依温度和湿度而异依温度和湿度而异5.7 HS 2K Polyurethane series 30005.7 HS 2K Polyurethane series 3000 HS 2K HS 2K 聚酯聚酯(PU)3000(PU)3000系列系列FEATURES & BENEFITS 特性和优点特性和优点q Compliant product 环保型产品( (符合符合VOCVOC标准标准) )q Compact range of mixing colours 色母种类紧凑q High efficiency 施工效率高q Slow flash off for large objects and high temperatures 缓慢的闪干时间, 适合于较大待喷物件和高温时喷涂5.7.1 HS 2K Polyurethane series 30005.7.1 HS 2K Polyurethane series 3000 HS 2K HS 2K 聚氨酯聚氨酯(PU)3000(PU)3000系列系列5:3 with HS Topcoat hardener. If required add max. 10% 5:3 with HS Topcoat hardener. If required add max. 10% UniUni Thinner Thinner以以5:35:3与与HSHS面漆固化剂混合面漆固化剂混合. . 如有需要可加入如有需要可加入10%(10%(最多最多) )的通用型稀释剂的通用型稀释剂. .1- 2 layers1- 2 layers喷喷1~21~2层层1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction feed1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction feed喷涂喷涂: :重力型喷枪重力型喷枪 1.3~1.5 / 1.3~1.5 / 吸入型喷枪吸入型喷枪1.6~1.81.6~1.8Flash-off time: 0 – 20 minutesFlash-off time: 0 – 20 minutes闪干时间闪干时间:0~20:0~20分钟分钟Drying time: 40 min at 60°C. / 24 hrs. at 20°C.Drying time: 40 min at 60°C. / 24 hrs. at 20°C.干燥时间干燥时间:60:60°C°C下干燥下干燥4040分钟分钟 / 20/ 20°C°C下干燥下干燥2424小时小时6.0 CLEARCOATS6.0 CLEARCOATS 清漆清漆6.1 6.1 2K Clear coat2K Clear coat1-1031-103 2K 2K 清漆清漆6.2 6.2 MS Clear coatMS Clear coat1-1041-104 MS MS 中浓度中浓度清漆清漆6.3 6.3 MS Brilliant Clear coatMS Brilliant Clear coat47-1447-14 MSMS 中浓度光亮清漆中浓度光亮清漆6.4 6.4 HS Clear coatHS Clear coat8-1048-104 HSHS高浓度清漆高浓度清漆6.5 6.5 HS Clear coat HS Clear coat 420-04420-04 HS HS清漆清漆6.1 2K Clear Coat 1-1036.1 2K Clear Coat 1-103 2K2K清漆清漆1-1031-103FEATURES & BENEFITS 特性和优点特性和优点 q Budget product 降低使用用量q Easy to use 使用操作方便q Fast drying 快干q Good gloss 具有优良的光泽度6.1.1 2K Clear Coat 1-1036.1.1 2K Clear Coat 1-103 2K 2K清漆涂料清漆涂料1-1031-1032:1 with 2K or MS Hardener2:1 with 2K or MS Hardener以以2:12:1与与2K2K或或HSHS固化剂混合固化剂混合2 - 3 layers2 - 3 layers喷喷2~32~3层层1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction feed1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction feed喷涂喷涂: :重力型喷枪重力型喷枪1.3~1.5 / 1.3~1.5 / 吸入型喷枪吸入型喷枪1.6~1.81.6~1.8Flash-off time: 5 - 10 minutesFlash-off time: 5 - 10 minutes闪干时间闪干时间:5~10:5~10分钟分钟Drying time: 25 min at 60Drying time: 25 min at 60°C°C. / 8 hrs. at 20. / 8 hrs. at 20°C°C. .干燥时间干燥时间:60:60°C°C干燥干燥2525分钟分钟 / 20/ 20°C°C干燥干燥8 8小时小时6.2 6.2 MS Clear Coat 1-MS Clear Coat 1-2 20404 MS MS 中浓度中浓度清漆1-204FEATURES & BENEFITS 特性和优点特性和优点 q Easy to use 使用操作方便q High gloss end result 具有高光泽高q Flows out very smooth 流平性非常好q No thinners needed 无需添加稀释剂6.2.1 6.2.1 MS Clear Coat 1-MS Clear Coat 1-2 20404 MS MS中浓度清漆中浓度清漆1-2041-2042:1 with MS Hardener2:1 with MS Hardener以以2:12:1与固化剂混合与固化剂混合2 layers2 layers喷喷2 2层层1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction feed1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction feed喷涂喷涂: :重力型喷枪重力型喷枪 1.3~1.5/1.3~1.5/吸入型喷枪吸入型喷枪1.6~1.81.6~1.8Flash-off time: 10 minutesFlash-off time: 10 minutes闪干时间闪干时间:10:10分钟分钟Drying time: 30 min at 60°C. / 15 hrs. at 20°C.Drying time: 30 min at 60°C. / 15 hrs. at 20°C.干燥时间干燥时间: 60: 60°C°C干燥干燥3030分钟分钟, 20, 20°C°C干燥干燥1515小时小时6.3 MS Brilliant Clear Coat 47-146.3 MS Brilliant Clear Coat 47-14 MS MS光亮光亮清漆47-14FEATURES & BENEFITS 特性和优点q Extra UV Absorber 超强的防紫外线吸收能力q High gloss 具有极高的光泽度q Easy to use 使用操作方便6.3.1 MS Brilliant Clear Coat 47-146.3.1 MS Brilliant Clear Coat 47-14 MS MS光亮型清漆光亮型清漆47-1447-142:1 with MS Hardener2:1 with MS Hardener以以2:12:1与与MSMS固化剂混合固化剂混合2 layers2 layers喷喷2 2层层1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction Feed1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction Feed喷涂喷涂: :重力型喷枪重力型喷枪 1.3~1.5/1.3~1.5/吸入型喷枪吸入型喷枪1.6~1.81.6~1.8Flash-off time: 10 minutesFlash-off time: 10 minutes闪干时间闪干时间:10:10分钟分钟Drying time: 30 min at 60°C. / 15 hrs. at 20°C.Drying time: 30 min at 60°C. / 15 hrs. at 20°C.干燥时间干燥时间:60:60°C°C下下干燥干燥3030分钟分钟 / 20/ 20下干燥下干燥1515小时小时Extra UV protection for colour additivesExtra UV protection for colour additives对颜色助剂有超强的紫外线防护作用对颜色助剂有超强的紫外线防护作用对颜色助剂有超强的紫外线防护作用对颜色助剂有超强的紫外线防护作用6.4.6.4. HS Clear Coat 8-104 HS Clear Coat 8-104 HS HS清漆涂料8-104FEATURES & BENEFITS 特性和优点q Saves application time 可节省施工时间q Saves material 可节约使用材料q High gloss 很高的光泽度q Good flow 优良的流平性q Easy to use 使用操作方便6.4.16.4.1 HS Clear Coat 8-104 HS Clear Coat 8-104 HSHS高浓度清漆高浓度清漆8-1048-1042:1 with HS Hardener2:1 with HS Hardener以以2:12:1．只能使用．只能使用HSHS固化剂混合．固化剂混合．8-150,8-140.8-1308-150,8-140.8-130Dust layer followed by a full layerDust layer followed by a full layer首首40%40%薄喷层，接次层薄喷层，接次层100%100%湿涂层湿涂层1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction Feed1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction Feed喷涂喷涂: :重力型喷枪重力型喷枪 1.3~1.5/1.3~1.5/吸入型喷枪吸入型喷枪1.6~1.81.6~1.8Flash-off time: Flash-off time: 5-5-10 minutes10 minutes闪干时间闪干时间:5-10:5-10分钟分钟Drying time: Drying time: 3030 min at 60°C. / 15 hrs. at 20°C. min at 60°C. / 15 hrs. at 20°C.干燥时间干燥时间: 60: 60°C°C干燥干燥3030分钟分钟 / 20/ 20干燥干燥1515分钟分钟6.56.5 HS Clear Coat 420-04 HS Clear Coat 420-04 HS HS清漆420-04FEATURES & BENEFITS 特性和优点q Compliant product 环保型产品(符合VOC标准)q Saves material and application time 节约材料和施工时间q Fast flash off 快速的闪干时间q Fast drying 干燥时间也较快6.5.16.5.1 HS Clear Coat 420-04 HS Clear Coat 420-04 HS HS清漆涂料清漆涂料420-04420-042:1 with Hardener 420-502:1 with Hardener 420-50以以2:12:1与固化剂与固化剂420-50420-50混合混合Dust layer followed by a full layerDust layer followed by a full layer1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction Feed1.3 – 1.5 Gravity Feed / 1.6 – 1.8 Suction Feed喷涂喷涂: :重力型喷枪重力型喷枪 1.3~1.51.3~1.5 / / 吸入型喷枪吸入型喷枪1.6~1.81.6~1.8Flash-off time: 5 - 10 minutesFlash-off time: 5 - 10 minutes闪干时间闪干时间:5~10:5~10时间时间Drying time: 30 min at 60°C. / 20 hrs. at 20°C.Drying time: 30 min at 60°C. / 20 hrs. at 20°C.干燥时间干燥时间: 60: 60°C°C干燥干燥3030分钟分钟 / 20/ 20°C°C干燥干燥2020小时小时Dust layer followed by a full layerDust layer followed by a full layer在暗色漆层上喷涂一层清漆在暗色漆层上喷涂一层清漆7.0 HARDENERS7.0 HARDENERS 固化剂固化剂2K HARDENERS 47-50 --- 2K 固化剂 47-50MS HARDENERS47-55 --- MS 固化剂 47-55HS HARDENERS8-150 --- HS 固化剂 8-150HS TOPCOAT HARDENERS 83-850 --- HS 面漆固化剂 83-850HS CLEARCOAT HARDENER 420-50 ---HS 清漆固化剂 420-50WASH PRIMER HARDENER 1-10 ---底漆固化剂1-10WASH PRIMER CH HARDENER 1-12 ---磷化底漆CH固化剂1-12EPOXY HARDENER 1-70 ---环氧固化剂1-70SYNTHETIC HARDENER 23-50 ---合成固化剂23-507.17.1 Hardeners Hardeners 固化剂固化剂FEATURES & BENEFITS 特性和优点q Compact yet complete range 精简　通用性强，可用于不同系列　可按不同作业环境及工件大小选举合适的固化剂8.0 THINNERS8.0 THINNERS 稀释剂稀释剂UNI THINNERS 通用型稀释剂SPOT REPAIR THINNERS 点补用稀释剂(驳口水)NITRO CELL. THINNER 硝基纤维稀释剂SYNTHETIC THINNER 合成型稀释剂WATER REDUCER 水性稀释剂8.18.1 Thinners Thinners 稀释剂FEATURES & BENEFITS 特性和优点q Compact range 精简系列，有效降低库存q Multi functional 具有多种用途9.0 ADDITIVES9.0 ADDITIVES 添加剂添加剂9.1 9.1 Flexing AgentFlexing Agent47-3947-39 柔软剂柔软剂9.2 9.2 Matting AgentMatting Agent47-4947-49 亚光剂亚光剂9.3 9.3 Structure CoatStructure Coat1-0601-060 珠纹漆珠纹漆9.4 9.4 DB Coating AdditiveDB Coating Additive 47-0947-09 DB DB涂料助剂涂料助剂9.5 9.5 HS DB Coating AdditiveHS DB Coating Additive 30-0930-09 HS DB HS DB 涂料助剂涂料助剂9.6 9.6 HS Fleet AdditiveHS Fleet Additive30-9930-99 HS HS 车用助剂车用助剂9.7 9.7 Colour AdditivesColour Additives 颜色助剂颜色助剂9.19.1 Flexing Agent 47-39 Flexing Agent 47-39 柔软剂柔软剂47-3947-39FEATURES & BENEFITS 特性和优点q Good durability 具有优良的耐久性q Also for soft plastics 可适用于软性塑料q Only for 2K Acrylic and PUR仅用于2K双组份底面漆上q Good adhesion on plastics 对塑料件有着优良的附着性能9.1.19.1.1 Flexing Agent 47-39 Flexing Agent 47-39 柔软剂柔软剂47-3947-39USAGE 使用方法:Add 5 – 30% 47-39 into the paint before you add the hardener在调配底／面漆时, 先加入量为5~30%才可加入固化剂9.29.2 Matting Agent 47 Matting Agent 47 – – 49 49 亚光剂亚光剂47-4947-49For different gloss levels add: q 20 %for50-70% eggshell glossq 30 %for40-50% satin glossq 40 %for0-10% Matt对不同的面漆光泽度的要求如下加入:加入量 光泽度等级20% 50~70%蛋壳光亮30% 40~50%缎面光亮40% 0~10%亚光9.3 STRUCTURE COAT 1-0609.3 STRUCTURE COAT 1-060 珠纹漆珠纹漆1-0601-060 To provide a structured finish for bumper and roof repairs提供结构末道漆, 适用于汽车保险杠和车底的修复Mix 1-060 2:1 with 2K paint or Clearcoat Mix this again 2:1 with hardener将1-060以2:1与2K油漆或清漆混合,再将此以2:1与固化剂混合.9.4 DB Coating Additive 47-099.4 DB Coating Additive 47-09 DB DB涂料助剂涂料助剂47-0947-09High build additive for chassis and industrial objects加厚成膜添加助剂, 适用于汽车底盘及工业物件Mix 47-09 1:1 with series 400 or 700Mix this 3:1 with 2K or MS hardener将47-09以1:1与400系列或700系列混合,再将此以3:1与2K或HS固化剂混合.9.5 HS DB Coating Additive 30-099.5 HS DB Coating Additive 30-09 HS DB HS DB涂料助剂涂料助剂30-0930-09Compliant high build additive for chassis and industrial objects环保型加厚成膜添加助剂, 适用于汽车底盘及工业物件1:1 with series 3000.Mix this 5:3 with HS Topcoat Hardener.以1:1与3000系列混合,再将此以5:3与HS面漆固化剂混合9.5 HS Fleet Additive 30-999.5 HS Fleet Additive 30-99 HS HS车用漆添加剂车用漆添加剂30-90 30-90 Additive for series 3000 to slow down the flash off timemix 0-10% max with series 3000. Mix this 5:3 with HS Topcoat Hardener.添加于3000系列中, 用来减慢闪干时间,以0~10%与3000系列混合,再将此以5:3与HS面漆固化剂混合.9.7 COLOUR ADDITIVES9.7 COLOUR ADDITIVES 颜色助剂颜色助剂For special effect coloursAdd max. 25% ColourAdditive to Base-Coat colours.用于特殊效果颜色加入25%(最多)的颜色助剂于色浆中。