RCDRecreationalCraft201353EUCertificationRequirements.docx

Recreational Craft 2013/53/EU)1. Design Categories of Recreational CraftA. OCEAN: Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) and significant wave heights of 4 m and above, and vessels largely self-sufficient. B. OFFSHORE: Designed for offshore voyages where conditions up to, and including, wind force 8 and significant wave heights up to, and including, 4 m may be experienced. C. INSHORE: Designed for voyages in coastal waters, large bays, estuaries, lakes and rivers where conditions up to, and including, wind force 6 and significant wave heights up to, and including, 2 m may be experienced. D. SHELTERED WATERS: Designed for voyages on small lakes, rivers, and canals where conditions up to, and including, wind force 4 and significant wave heights up to, and including, 0,5 m may be experienced. Boats in each Category must be designed and constructed to withstand these parameters in respect of stability, buoyancy, and other relevant essential requirements listed in Annex I, and to have good handling characteristics. 2. Product information Required for Certification EvaluationGENERAL INFORMATION OF MANUFACTURERManufacturer:Address:ZIP code:City:Country:VAT # (for EU only):Signatory, Name:Signatory, Title:Phone:Fax:Email:WWW:Head of Engineering:Craft data and properties1 Model designator:Similar models:2 Craft Identification Number (CIN)(ISO 10087) CIN example: NL-HXAB7A33G506____-______________3 Length of the hull (LH) [m]A B C D4What is the designated Design Category? (RCD 94/25/EC Annex I.A.1)A Aa B+C B+F G PCA5 Certification module(RCD 94/25/EC Article 8)6 Length of the waterline (LWL) [m]7 Beam of the hull (BH) [m]8 Maximum draught (TMAX) [m]9 Canoe body draught (TC) [m10 Loaded displacement mass (mLDC) [kg]11 What is the maximum declared speed of craft (v) in [knots]?Monohull Multihull Inflatable12 Please select the applicable hull type:13 Can the craft be towed on a trailer? Yes No14Is the craft considered Sailing or Non-sailing according to the definition in ISO 12217-1Sailing Non-sailingThe craft is considered open Partially decked Fully decked15Is the craft open to the sky, partially decked or fully decked according to the stability standard's definitions in ISO 12217?No Only Cockpit(s) Only Recess(es) Cockpit(s) & Recess(es)16 Are there cockpits or recesses on the craft?17 - Please consider the relevant Applicable Inapplicableparts of ISO 12217 and check if ISO 11812 is applicable18- Should the cockpits be considered quick-draining or watertight according to ISO 11812?Quick-draining Watertight19- Please check if the recesses are watertight according to ISO 11812?Watertight recessNot watertightGRP Steel Aluminum Wood20Please select the building materials used for the hull and superstructure(combinations are possible)NoneTillerGeared link systemCable push/pullCable and pulley systemHydraulic system21What kind of steering mechanism is the craft equipped with? Please select the applicable system by reviewing the following definitions: Geared link system, Cable push/pull, Cable and pulley.Other means of steeringEnclosed steering position.22- Is the steering position enclosed or exposed according to ISO 15083? Exposed steering position.The strong points are metallic.The strong points arenon-metallic.23According to Annex I.A.3.9 of the Recreational Craft Directive the craft needs to be equipped with one or more strong points to accept anchoring, mooring and towing loads.- Please select all applicable features:The strong points are fitted with bolts and nuts.No.Yes, with a portable system.24 Is the craft fitted with fuel system?Yes, with a permanently installed systemDiesel Petrol/Gasoline LPG25 - Which fuel systems are installed on the craft?26 Is the craft equipped with a toilet? Yes No27 - Is the craft equipped with a sewage holding tank? Number of sewage holding tank3. Available conformity assessment modulesProduct type /Design Category Available ModulesRecreational craft 2.5m  hull length<12m 12m  hull length <24mA / “Ocean”B / “Offshore” Aa, B+C, B+D, B+E, B+F, G or HA, Aa, B+C, B+D, B+E, B+F, G or HIf harmonised standard for stability and buoyancy are complied withC / “Inshore”Aa, B+C, B+D, B+E, B+F, G or HIf harmonised standard for stability and buoyancy are not complied withB+C, B+D,B+E, B+F,G or HD / “Sheltered Waters” A, Aa, B+C, B+D, B+E, B+F, G or HPWC A, Aa, B+C, B+D, B+E, B+F, G or HDesign and constructionComponents B+C, B+D, B+F, G or HExhaust Recreational Marine Propulsion Engines B+C, B+D, B+E, B+F, G or HPass-by test Reference Boat Fn + P/D methodOutboard engines, Personal Watercraft and stern drive engines with integral exhaustAa, G or HNoiseRecreational craft with inboard engines or stern drive engines without integral exhaustAa, G or H A, Aa, G or H A, Aa, G or H4. Detailed Requirements for Assessment ModulesModule Title DescriptionA Internal Production ControlInternal conformity assessment and production control 。