DPP355_Setup_Guide_SC.pdf

DocuPrint P355 d/P355 db Fuji Xerox Co., Ltd. (Edition) 1 June 2012604E 60430 / DE4982Z3-1Copyright© 2012 by Fuji Xerox Co., Ltd.Printed in China1Point2aPoint2b45Point67Point1 2 3213604E 60430TBD本说明书提供了打印机的安装说明在安装前，请阅读《安全说明书》检查内容打印机本说明书 安全说明书 操作面板说明书驱动程序光盘工具包 PostScript驱动程序库CD电源线 PS终端用户许可协议PS驱动程序协议准备 USB电缆（推荐2米）或网络电缆以及打印纸*11 打印机不支持喷墨打印纸插入驱动程序光盘工具包驱动程序光盘工具包不支持 Windows 98/Me/2000选择 [开始设置] 按钮，然后按照说明进行操作如果未自动显示上面的画面，请在驱动程序光盘工具包中的 SetupVideo 文件夹下双击 eznavi.exe观看视频设置 使用本说明书去掉包装胶带安装可选附件请参阅附件随附的安装说明书在纸盘中装入纸张将纸盘从打印机中拉出。

调整导纸器，使宽度导纸器与纸张边缘对齐 调整好导纸器后，将纸盘插入打印机设置打印机时，装入A4纸或尺寸更大的纸张装入Legal尺寸纸张或用户指定的打印介质时，捏住导杆并同时滑动纸盘的可延长部分连接USB电缆或网络电缆USB连接 有线网络连接USB接口网络接口使用USB电缆连接打印机和计算机时，请勿在弹出的“找到新硬件向导”中进行任何选择接下页完成！打开打印机电源网络设置仅适用于DocuPrint P355 d打开前盖，拆去包装材料This guide provides the installation instructions for the printer. Before installation, read the Safety Guide.Check the Contentsz Printerz This guide z Safety Guide z Operator Panel Guidez Driver CD Kit z PostScript Driver Library CDz Power cord z PS End User License Agreementz PS Driver ContractPrepare a USB cable (2 m recommended) or a network cable and paper*1*1 The printer does not support inkjet paper.Insert the Driver CD KitDriver CD Kit does not support Windows 98/Me/2000.Select the [Start Setup] button, and follow the instructions.If the above screen does not appear automatically, double-click eznavi.exe in the SetupVideo folder included on the Driver CD Kit.Watching the video setup Using this guideRemove the packaging tapesWhen setting up the printer, load A4 size paper or larger. When loading Legal size or user-specified print media, slide the extendable part of the tray while pinching the lever.Install optional accessoriesLoad paper in the trayPull the tray out of the printer. Adjust the paper guides, and align the width guides against the edges of the paper. After confirming that the guides are securely adjusted, insert the tray into the printer.Refer to the installation guide provided with your accessory.Connect a USB or Network CableUSB connection Wired network connectionUSB connectorNetwork connector Do not select anything in New Hardware Found Wizard that appears when the printer and your computer are connected via a USB cable.Continued overleafComplete !Turn on the printerNetwork setup is available only for DocuPrint P355 d.Open the front cover and remove the packaging material8910Other Network SettingsPointPoint1Ready to PrintToner Left X2 2MenuReport/List3MenuAdmin MenuX3 4Admin MenuPCL Settings5Admin MenuNetwork Setup6Network SetupEthernet7Network SetupTCP/IP8TCP/IPIP Mode9TCP/IPIPv410IPv4Get IP Address11Get IP AddressDHCP / Autonet*12Get IP AddressPanel13Restart Printer to apply setting14IPv4Get IP Address15IPv4IP Address16IP Address000.000.000.000*17IP Address192.000.000.000*18IP Address192.168.001.100*19Restart Printer to apply setting20IPv4IP Address21IPv4Subnet Mask22Subnet Mask000.000.000.000*23Subnet Mask255.000.000.000*24Subnet Mask255.255.255.000*25Restart Printerto apply setting26IPv4Subnet Mask27IPv4Gateway Address28Gateway Address000.000.000.000*29Gateway Address129.000.000.000*30Gateway Address192.168.001.254*31Restart Printer to apply settingPointX4 X2 X2 X2 如果通过有线网络连接，请转到步骤 8。

如果通过USB电缆连接，请转到步骤 10如果通过无线连接，请参照《使用说明书》设置无线设定，然后转到步骤 10设置IP地址此步骤介绍了如何通过操作面板设置IPv4地址 有关IPv6地址设置方法的信息，请参阅驱动程序光盘工具包中包含的《使用说明书》要返回 1，请按 (菜单)按钮其他网络设置有关其他网络设置的信息，请参阅驱动程序光盘工具包中包含的CD-ROM文档 (HTML)：驱动程序光盘工具包 顶部菜单 > [Documentation] 选项卡 > [CD-ROM说明文件(HTML)]安装打印驱动程序如果未自动显示上面的画面，请在驱动程序光盘工具包中的 SetupVideo 文件夹下双击 eznavi.exe如果通过TCP/IP连接1. 单击[安装驱动程序及软件]2. 按照安装程序画面上显示的说明进行操作如果通过USB连接1. 单击[安装驱动程序及软件]2. 选择[Documentation] 选项卡3. 选择[CD-ROM说明文件(HTML)]4. 选择[DocuPrint P355 d]或[DocuPrint P355 db]>[驱动程序安装]>[安装通过USB端口连接的打印机]，然后按照说明进行操作。

有关如何在 Macintosh 计算机上安装 PostScript 驱动程序 的信息 ，请参阅 PostScript User Guide设置完成！此处使用的IP地址和网关地址仅为示例 要获取IP地址，请联系网络管理员使用USB电缆连接打印机和计算机时，请勿在弹出的“找到新硬件向导”中进行任何选择设置子网掩码和网关地址要验证 IP 地址，可打印一份设置列表有关如何打印设置列表，请参阅《使用说明书》设置完成关闭打印机并重新打开菜单When connecting via a wired network, go to step 8. When connecting via a USB cable, go to step 10.Set the IP AddressThis step explains how to set an IPv4 address on the operator panel. For information on how to set an IPv6 address, refer to the User Guide included on the Driver CD Kit.The IP address and gateway address used here are examples. To get your IP address, talk to your network administrator.To return to 1, press the (Menu) button.For information on other network settings, refer to the CD-ROM Documentation (HTML) included on the Driver CD Kit: Driver CD Kit top menu > [Documentation] tab > [CD-ROM Documentation (HTML)]Install Print DriversIf the above screen does not appear automatically, double-click eznavi.exe in the SetupVideo folder included on the Driver CD Kit.When connecting via USB1. Click [Installing Driver and Software].2. Select the [Documentation] tab. 3. Select [CD-ROM Documentation (HTML)].4. Select [DocuPrint P355 d] or [DocuPrint P355 db] > [Driver Installation] > [Installing a Printer Connect。