HD系列关于接触式卡编程说明

1、HD系列关于接触式卡编程说明作者：技术支持部 胡富云标准支持及接口介绍HD系列的III型机与IV型机支持接触式IC读写ICC_memcard_atr() activates the designated Synchronous IC card and waits for itsATR.short ICC_memcard_atr(unsigned char * dbuf,unsigned char * len,unsigned short vol_index) ;1、4428接触式存储卡Read_4428_With_PB( )Read data bytes of 4428 and their associated protection bits.short Read_4428_With_PB(unsigned short StartPos,unsigned short NOB,char * Bfr,char * PB_Bfr) ;Read_4428_NO_PBRead data bytes of 4428 card.short Read_4428_NO_PB (unsigned shor

2、t StartPos,unsigned short NOB,char * Bfr) ;Write_4428( )Write one byte of data and associated protection bit (if required) into 4428.short Write_4428 (unsigned short StartPos,char DestByte,char PBSetFlag) ;Verify_4428_PSC( )Verify the 2-byte PSC of 4428short Verify_4428_PSC (char PSC1,char PSC2) ;详细介绍请参见基本API说明示例:if (ICC_sock_check(ICC_SOCK_MAIN) = ICC_SOCK_CARD_PRESENT)/检测到卡片ICC_interface_power(ICC_POWER_ON);/卡座上电ICC_select_sock(ICC_SOCK_MAIN);/选择主卡座rcode = ICC_memcard_atr(abuff, &alen, ICC_VOL

3、TAGE_5);/存储卡ATRif (!rcode)if (*(unsigned long *)abuff) = ATR_SLE4428)/4428卡if (Verify_4428_PSC(0xFF, 0xFF)/密码校验ErrorBeep(0);DispStr_CE(0, 1, 卡片密码校验错误, DISP_POSITION | DISP_CLRSCR);goto Card4428Error;elsememset(crwBuf, 0, 64);Read_4428_With_PB(0x20, 0x30, crwBuf, stmp); /从起始地址20H读30H字节到crwBuf中set_console_english();clear_console();move_cursor(0, 0);for (m = 0; m 6; m+)/显示读取的内容for (n = 0; n 8; n+)goto_xy(n * 16, m);printf(%02X, crwBufm * 8 + n);for(m = 0; m 48; m +)if(Write_4428(0x20 + m, crwBufm,

4、0) /单字节取反回写ErrorBeep(0);DispStr_CE(0, 1, 写卡失败, DISP_POSITION | DISP_CLRSCR);goto Card4428Error;RightBeep();goto_xy(0, 7);printf(press any to return);goto Card4428OK;elseErrorBeep(0);DispStr_CE(0, 1, 非4428接触卡, DISP_POSITION | DISP_CLRSCR);goto Card4428Error;2、4442接触式存储卡Read_4442_NO_PB( )This function reads data bytes of 4442 card without protection bits.short Read_4442_NO_PB (unsigned short StartPos,unsigned short NOB,char * Bfr) ;Read_4442_PB( )Read all the protection bits of 4442.short Read_444

5、2_PB (char * PB_Bfr) ;Write_4442( )Write 1 byte data to 4442. If required write protection bit.short Write_4442 (unsigned short StartPos,char DestByte,char PBSetFlag) ;Verify_4442_PSC( )Verify the 3-byte PSC of 4442short Verify_4442_PSC (char PSC1,char PSC2,char PSC3) ;详细介绍请参见基本API说明，4442卡与4428卡编程类似。3、SAM卡接触式智能卡ICC_cpucard_ATR () activates the designated asynchronous IC card and waits for itsATR.short ICC_cpucard_ATR (unsigned char * dbuf,unsigned char * len,unsigned short clk_index,unsigned sho

6、rt vol_index,unsigned short ATR_FiDi,unsigned short flags) ;ATR CheckThese functions check if the ATR of the card is compatible with ISO7816-3 & EMV orPBOC (Peoples Bank of China) standards. Card communication parameters are setaccording to the standards if so. This function also checks if the protocol type specified inthe card ATR is available in this version of hardware.short EMV_ISO_atr_check (unsigned char * pBuff,unsigned char len) ;short PBOC_atr_check (unsigned char * pBuff,unsigned char

7、len) ;ICC_CPU_get_param() reads the internal control parameters of the card in currentsocket.typ_cpucard_param * ICC_cpucard_get_param (void) ;short ICC_cpucard_set_param (typ_cpucard_param * pSrc) ;short ICC_cpucard_PTS(unsigned char * pPTS_request,unsigned short len_PTS_request,unsigned char * pPTS_responce,unsigned char * len_PTS_response) ;Data Exchange For T=0ICC_T0_TPDU() is a TPDU exchange subroutine for T=0 CPU card.short ICC_T0_TPDU(short isIn,short CLA,short INS,short P1,short P2,short

8、 P3,unsigned char * databuff,unsigned short * pSW);Data Exchange For T=1ICC_TO_frame() is a frame exchange subroutine for T=1 CPU card.short ICC_T1_frame(unsigned char * pfrm_send,unsigned short len_send,unsigned char * pfrm_rx,unsigned short * len_rx) ;示例9600init_sam_9600(SAM_0015)int rcode, i;unsigned short rc, SW;unsigned char abuff256, tbuff256,alen, ch;typ_cpucard_param tcp;ICC_interface_power(ICC_POWER_ON);ICC_select_sock(ICC_SOCK_SAM);memset(abuff, 0, sizeof(abuff);for(i = 0; i 5; i+)rcode = ICC_cpucard_ATR(abuff, &alen, ICC_CLOCK_4M, ICC_VOLTAGE_5, 0x11, 1);/ATR，此处为以4M的时钟频率，9600标准，电压5Vif(rcode = 0)EMV_ISO_atr_check(abuff, alen);

《HD系列关于接触式卡编程说明》由会员大米分享，可在线阅读，更多相关《HD系列关于接触式卡编程说明》请在金锄头文库上搜索。