焚烧炉OG200C技术参数.docx

Main DataPerformance dataIncinerator (combustion chamber).Type:OG 200CCapacity:Corresponding to:400,000 kcal/h (465KW)50 l/h IMO sludge oil.Max .400l/solid waste pr.charge.With sluice 55 l pr.charge20 l/h sewage sludgeIMO sludge (20% water contentIMO class 02Combustion chamber temperature:Flue gas temperature:Surface temperature:Max.1200 cWorking. 850-1150 CMax.375 cWorking. 250 -340 CNor exceed ambient temperature 15c.Electrical power consumption:15 kWFrom ship distribution system.Negative pressure:10-35 mmWCNegative pressure in combustion chamberTotal weight:3020 kgOutline dimension:1350 x 1890 x 1960 (L x W x H)See dimension drawing.Burner (fixed on incinerator unit)Type:F-50-45-TMaker: Fremo.Capacity:18-28 l/hTwo nozzles. 2.5 + 4.5 gphOil pump:J4-CCC-1002Working press. 16 bar Max 21 bar.El. Motor:380/440V 50/60Hz 0.55/0.65kW3600 rpm.Ignition transformer:230V / 10,000VWeight:30 kgOutline dimension:845 x 539 x 387 (L x W x H)See dimension drawing.Flue gas fanType：DN300 H2One stage centrifugal fan.Designed to withstand max temperature of 450 cCapacity:7,000 std. m3/hrAt 150 mmWC total back pressure.El. Motor380/440V, 50/60Hz, 7.5/8.7Kw, 1450/1740rpmWeight:326 kgOutline dimension:1015 x 1040 x 1030 (L x W x H)See dimension drawing.Flue gas damper.Type:A welded steel damper with actuatorSize:DN 400/300Actuator motor:GBB 131.1 24V 5VADrive force 200N.Travel time for 90 is° 150sec.Weight:65kgDimension between flanges:300 mmSee dimension drawing.Sludge tank.Volume:Net: 1100 litres.Test pressure:1 barCorrosion Protection:Internal coated with heavy tare epoxy paint.Flange rating:NP 16Weight:490 kg.Outline dimension:(L x W x H)See dimension drawingSludge circulating pump.Type:2CWF-11BCapacity:20 m3/h at 0.11MPa discharge pressure.El. Motor:380/440V,50/ 60Hz, 2.2 kW, 3470 rpmWeight42kgConnectionsSuction :DN 65,Discharge:DN40Sludge dosing valve.Type:Mono CB 14 R5/X frequency controlled screw pump for quantity control of sludge.El. Motor:220V, 50Hz, 0.37kw, 1500 rpm.Control speed:320—1500 RPMDiesel oil preheater.Type:FE 415Rating:440/380V, 60/50Hz, 1.5kw.Electrical control panel.Type:A Telemecanique panel of protected steelEnclosure ratingIP 55Weight:56 kg (included in the 3020 kg for main unit)Ships system interface requirement.Electrical.Power supply.Power (Approx. 15 kW)Cable (W1-1)440/380 V -60/50 Hz 32 A 3 x 10 mm2 +EFlue gas fan.Cable (W1-2)3 x 4 mm2 +EFlue gas damper.Cable (W1-15)23 x 1.5 mmThermocouple flue gas.Cable (W1-19)2 x 1.5 mm2 with screenAlarm line for common alarm to ship alarm system.Cable (W1-13)2 x 1.5 mm2 +EEmergency stop (if applicable).Cable (W1-6)2 x 1.5 mm2 +ERunning indicator (available).Cable (W1-14)2 x 1.5 mm2 +ESludge circulating pump on sl. Tank.Cable (W1-4)3 x 2.5 mm2 +EControl power to sl. tank (220V).Cable (W1-12)2 x 1.5 mm2 +EControl signal on sl. tank (24V DC).Cable (W1-24)4x1.5 mm2High level switch sludge tank for stop of sludge pump or alarm.Cable (W3-9)2 x 1.5 mm2 +EPower supply for sludge tank w/ el. heater.Power (Approx. 12 kW)Cable (W3-6)380/440V, 50/60 Hz ,25 A3 x 6 mm2+EDiesel oil.Diesel oil supply lineTo be equipped with filter and a closing valve. Connection.Min. ? 12 mm.DN 15 flangeDiesel oil return lineEquipped with closing valve only if the return line normally will be under pressure.Connection.Min. ? 12 mmDN 15 flangeFlue gas duct.Incinerator to damper.DuctDN 400Damper to flue gas fan.DuctDN 300Flue gas fan to open air.DuctDN 300Sludge and Steam or Air.Steam /air supply line for burner atomizing.ConnectionPressureConsumption:SteamComp. airDN 15 flange 6 - 8 bar approx. 20kg/h approx. 20Nm3/hDrain from spill collector.Connection1" BSP (female)Sludge tank. (11001 option)Supply and filling.Overflow lineSupply and return line for incineratorAir vent.Drain.Sample points.Connections.Connection.Connections.Connection.Connection.Connections.DN 50 flangeDN 65 flangeDN 25 flangeDN 65 flangeDN 65 flange 1/2" BSP (male)Heating:SteamConnection.Consumption.Max. Pressure.1/2" BSP (female) approx. 50k/h 10 barDetailed information for all system is found on arrangement drawing.。