10KV ABB真空浇注干式变压器1600KVA技术数据表.doc

ABB真空浇注干式变压器技术数据表Specification of ABB Vacuum Cast Coil Dry-type Transformer真空浇注三项干式变压器，能适用于户内安装，分接点采用螺栓连接3-phase Vacuum Cast Coil dry type transformer for indoor installation, tapping reconnectable by bolted links.符合标准及技术协议Standard and Tech. Agreement符合□GB1094.11-2007，□GB/T10228-2008，□IE060076-11According to □GB1094.11-2007，□GB/T10228-2008，□IE060076-11合同编号和客户名称型号TypeSCB10-1600/10数量Quantity台Set2相数Number of Phase3频率FrequencyHz50容量RatingkVA1600电压比Voltage RatiokV10/0.4高压分接范围Tapping On HV%+2,-2*2.5%冷却方式Cooling MethodANAF最大系统电压Highest System VoltagekV12/-工频耐压Power Frequency Withstand VoltagekV35/3额定冲击电压Rated Lighting Impulse WithstandVoltagekV75/-连接组别Vector GroupDyn11空载损耗No Load LosskW标准负载损耗Load Loss At 75℃kW标准短路阻抗Short Circuit Impedance%6声压级Noise LeveldB标准绝缘等级insulation classF温升限值Temperature Rise100局部放电Partial DischargepC5罩壳Enclosure防护等级Enclosure Protection ClassIP32进出线方式Terminal Incoming/Outgoing---罩壳颜色Painting color---罩壳材料 ①钢板②铝合金③不锈钢④其他Material of enclosure ①Steel ②Alloy Aluminium ③Stainless steel ④Others---带IP3X罩壳①带底网板②不带底网板③其他Enclosure with IP3X ①Bottom board ②Without bottom board ③Others---罩壳型式Enclosure type固定/可拆卸Fixed/dismoutable---罩壳门上配连锁开关Lockout switch for enclosure是/否 Yes/No---是否需现场拼装Enclosure need to be installed on site是/否 Yes/No---温控器thermometer温控仪计算机接口型式 The output type of thermometer①4-20mA ②RS232 ③RS485③温控器传感线长度 ①标准（4m） ②10m ③其他Length of sensor ①standard（4m） ②10m ③othersIP32时 ②10mFor IP32 ②10m除IP32外时 ①标准（4m）with the exception of IP00①standard（4m）②配置滚轮Roll是/否 Yes/No否非常规试验要求Special Test否变压器负载类型①普通配电 ②大电机直接起动 ③其他Load types for the transformer ①regulardistribution ②start up of big engine ③others若是大电机直接起动提供相关技术信息Please provide the relatedinformation if using big engine①普通配电变压器安装位置和运输通道对尺寸和重量有无特殊要求If any special requirements of the size or weight for location and transportation passage是/否 Yes/No否是否已提供变压器技术文件和参考外形图 If the technical documents and the outline drawings of the transformer has been provided是/否 Yes/No否是否已提供变压器安装轨距 If the Installation roller distance of the transformer has been provided是/否，如已提供需写明或附图 Yes/No，if yes，pleaseindicate or provide drawing是，已提供公司样本本客户是否有通用的技术协议要求 If the customer has a general technical requirement是/否 Yes/No否本客户是否对设备编号提出要求 If the customer has a equipment number是/否 Yes/No否本客户是否对铭牌或标志牌提出要求 If the customer has a name plate or marker plate是/否 Yes/No否包装方法 ①一般包装 ②国内木箱包装 ③出口木箱包装 ④其他Packing method ①Commonly packing ②wood packing for domestic ③wood packing for export ④others① ②运输方式 ①海运 ②铁路 ③公路 ④其他Transportation ① sea transport ②Rail transport ③Road transport ④ others① ② ③随机文件Attached Documents数量 Quantity份Set3语言 Language①中文 ②英文 ③中英文 ④其他 ①Chinese ②English③Chinese and English④others ③最终到货地点The final destination of the goods上海备注Remarks编制： 日期： 校核： 日期：2 MPT-10-04第10版。