英格索兰冷干机tsc操作维护手册.pdf

Ensure that the operator reads and understands the decals and consults the manuals before maintenance or operation.Ensure that the Operation and Maintenance manual is not removed permanently from the machine.Ensure that maintenance personnel are adequately trained, competent and have read the Maintenance Manuals.C.C.N.: 80441918 en DATE: MAY 2006 REV.: CTSC2A-11AOPERATION AND MAINTENANCE MANUALCONTENTSTSC2A-11A1 CONTENTSPAGECONTENTSPAGE1.0CONTENTS1 2.0FOREWORD2 3.0ABBREVIATIONS therefore, compatibility between discharge piping, system accessories and software must be assured.•For the foregoing reasons, the use of plastic piping, soldered copper fittings and rubber hose as air piping is not recommended. In addition, flexible joints and/or flex lines can only be considered for such purposes if their specifications fit the operating parameters of the system.•It is the responsibility of the installer and owner to provide the appropriate service pipework to and from the machine.WARNING“Ingersoll Rand air dryers are not designed, intended, or approved for breathing air applications. Ingersoll Rand does not approve specialized equipment for breathing air application and assumes no responsibility or liability for dryers used for breathing air services.”WARNINGThe specification of this machine is such that the machine is not suitable for use in flammable gas risk areas.WARNINGVent compressed air system before opening.5.0 SAFETYTSC2A-11A7 Read and understand safety and information decals thoroughly. Heed warnings and follow instructions. If you do not understand, inform your supervisor.5.3DECALSRead the Operation and Maintenance manual before operation or maintenance of this machine is undertaken.Lifting point.WARNING - Hot surface.WARNING: Electrical shock risk.ROTATIONDo not operate the machine without the guard being fitted.CONDENSATE DRAINPOWER INLET (AC)WARNING - Do not undertake any maintenance on this machine until the electrical supply is disconnected and the air pressure is totally relieved.6.0 RECEIPT / HANDLING8TSC2A-11A When you receive the dryer please inspect it closely. Any indication of careless handling by the carrier should be noted on the delivery receipt especially if the dryer will not be immediately unpacked. Obtaining the delivery persons signed agreement to any noted damages will facilitate any future insurance claims. The dryer will normally be delivered with a cardboard box or other cover. If a knife has to be used to remove this cover, ensure that the exterior paintwork of the dryer is not damaged.Incorporated within the base of the dryer are slots to enable a fork lift truck to move the machine. Ensure truck forks are fully engaged on both sides. Alternatively a special lifting frame can be utilized to enable a crane or hoist to move the dryer. Use only marked lifting points.6.1RECEIPT IMPORTANT READ THIS LOST OR DAMAGED GOODSTHOROUGHLY INSPECT THIS SHIPMENT IMMEDIATELY UPON ARRIVALOUR RESPONSIBILITY FOR THIS SHIPMENT CEASED WHEN THE CARRIER SIGNED BILL OF LADINGIf goods are received short or in damaged condition, it is important that you notify the carrier and insist on a notation of the loss or damage across the face of the freight bill. Otherwise no claim can be enforced against the transportation company.If concealed loss or damage is discovered, notify your carrier at once and request an inspection. This is absolutely necessary. Unless you do this the carrier will not entertain any claim for loss or damage. The agent will make an inspection and grant a concealed damage notation. If you give the transportation company a clear receipt for goods that have been damaged or lost in transit, you do so at your own risk and expense.WE, AT lR, ARE WILLING TO ASSIST YOU IN EVERY POSSIBLE MANNER TO COLLECT CLAIMS FOR LOSS OR DAMAGE, BUT THE WILLINGNESS ON OUR PART DOES NOT MAKE US RESPONSIBLE FOR COLLECTION OF CLAIMS OR REPLACEMENT OF MATERIAL. THE ACTUAL FILING AND PROCESSING OF THE CLAIM IS YOUR RESPONSIBILITY.Ingersoll-Rand Company6.2UNPACKING AND HANDLING 7.0 INSTALLATIONTSC2A-11A9 For technical information see section 8.0.Ensure that the correct tie down points are used.For major overhaul position the machine to obtain lifting access e.g. fork lift truck.Ambient temperatures higher than 46°C (115°F) must be avoided as well as areas of high humidity.Consider also the environment surrounding or near the dryer. The area selected for the location of the dryer should be free of dust, chemicals, metal filings, paint fumes and overspray.Hard surfaces may reflect noise with an apparent increase in the decibel level. When sound transmission is important, a sheet of rubber or cork can be installed beneath the machine to reduce noise. Flexible piping may be required.It is recommended that provision be made for lifting heavy components during major overhaul. Use only lifting points provided.Minimum space 。