【BS英国标准word原稿】BS EN 1360- Rubber and plastic hoses and hoseassemblies for measured fuel dispensing systems — Specification.doc

BRITISH STANDARD BS EN1360:2005Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems — SpecificationThe European Standard EN 1360:2005 has the status of aBritish StandardICS 75.200; 23.040.70National forewordThis British Standard is the official English language version of EN 1360:2005. It supersedes BS EN 1360:1997 which will be withdrawn on 11 November2005.The UK participation in its preparation was entrusted to Technical Committee PRI/66, Rubber and plastic tubing, hoses and hose assemblies, which has the responsibility to:— aid enquirers to understand the text;— present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed;— monitor related international and European developments and promulgate them in the UK.A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index〞, or by using the “Search〞 facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 28, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amd. No.DateCommentsThis British Standard was published under the authority of the Standards Policy and Strategy Committeeon 29 September 2005© BSI 29 September 2005ISBN 0 580 46187 4Amendments issued since publicationEUROPEAN STANDARD NORME EUROPÉENNEEUROPÄISCHE NORMEN 1360May 2005ICS 75.200; 23.040.70 Supersedes EN 1360:1996English versionRubber and plastic hoses and hose assemblies for measured fuel dispensing systems - SpecificationTuyaux et flexibles en caoutchouc pour distribution mesurée de carburants - SpécificationZapfstellenschläuche und -schlauchleitungen aus Gummi und Kunststoff - AnforderungenThis European Standard was approved by CEN on 15 March 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMI TÉ EUROP É EN DE NORM AL IS AT ION EU RO PÄISCHE S KOM I T EE FÜR NO RMUN GManagement Centre: rue de Stassart, 36 B-1050 Brussels© 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Ref. No. EN 1360:2005: EContents pageForeword..............................................................................................................................................................41 Scope ......................................................................................................................................................52 Normative references ............................................................................................................................53 Terms and definitions ...........................................................................................................................64 Classification..........................................................................................................................................65 Materials and construction .......................................................。