移动电源说明书-完美版.doc

USER MANUAL Thanks for choosing our device, which could charge the digital products with DC 5V input. Please read through this user manual carefully before you use this remarkable product. UNIT VIEW DESCRIPTION1. Turn on button2. Capacity indicators3. Input port4. Output port 15. Output port 2PRODUCT SPECIFICATIONWork for Mobile phone and digital productInput voltageDC5VInput current1000 mAOutput voltageDC 5V-5.5VOutput current1000 mACapacity6600 mAhProduct weight174.2gProduct dimension97.2(L) x 62.1（W) x 22.1(H)mmOperating temperate-10℃-60℃Storage temperate-10℃-45℃HOW TO USE1. Simply using the attached USB cable to charge the digital product, One end of the USB cable connect with the "OUT" port of the power bank, another end connect with the digital product with converted tip or charging cable. Press the turn on button once, it will start to charge and the LED will flash.2. When the digital product is fully charged, disconnect your digital product from the power bank. When charging cable disconnected or fail to connect the digital product, the LED will stop flashing. And the power bank will turn off automatically after 30 seconds3. 30％　70％　100％ is the three capacity indicator, when the 30% indicator light on means low power ,please charge the power bank in time4.Check the capacity by pressing and releasing the turn on button, the LED will be off within 30 second after the button is pressed.5.Pushing turn on button once more for a while once, the light is flashing. Pushing turn on button for while once again, the flashlight is switching off.Note:1. Because of the power conversion efficiency of the power bank and your digital devices, the rated capacity of the power bank is not equal to the actual chargeable capacity.2. This power bank could charge most of the digital devices, but there is still the chance that maybe some kind of devices or models could not be charged, this is the normal area and cannot be regarded as the defects.3. If the power bank could not charge your devices, then check if the cable is firmly connected, or if the right connector has been chosen. The original cable sold along with your devices is always suggested to use. 4. If the instantaneous current is oversize when charging the digital devices, the power bank will turn to protected mode automatically. To relieve the protected mode by charging the power bank.HOW TO CHARGE THE POWER BANKThe "IN" port is the charging port of the power bank.The capacity indicator will flash when charging the power bank and the 100% indicator will light on after full charging. After disconnecting the cable, the LED will be off within 30 seconds. . MAINTENANCEPlease read the below carefully. The misuse will damage the devices and lead to other anomalies. And we will not take the responsibility for those situations.1. The high quality or good brand cable and connectors are always suggested for charging.2. Recharge your power bank once every 3 months when it is not in use3. Keep the power bank away from fire or any extreme temperature or moist environment and corrosive material 4. Keep the power bank out of the reach of children, the person without enough mental ability and the person without enough knowledge to use this product5. Never wash the power bank with any chemicals, soaps and detergents 6. No Crash, do not open or puncture or hit or break the power bank, do not repair the power bank by yourself 7. When you found the power bank or AC adapter/charger has any bad sign, such as expansion or blow up, etc. please stop using this power bank immediately. 8. Please do not use in the combustible gas.9. Please do not use other methods or machines to charge this power bank 关于公司历史和规模规模，我公司成立于2011年，经过4年的发展，公司的有员工150人，关于研发部门，我们共有10个人的研发团队，10人的QC控制队伍。

关于交期，我们每个月的 产能是在30W个移动电源，一般我们的交期是在15天关于品质，我公司拥有ISO9001-2010质量体系认证，每年都会有评审正如ISO-90001体系上说的一样我公司一个产品从零件到整机共需要经历各个品质检验关我们知道电芯在整个移动电源中充当一个心脏的角色首先，我们的每一款电芯都需要上柜检测,确保各项参数能达到A品电芯的标准，每一个PCBA和壳料都有检测标准来控制质量这些只是IQC在产线上，我们还有IPQC（Input Process quality control），来控制整个生产过程第一步，我们将做好的半成品做性能检测，第二步，我们将检测合格的产品去做老化测试，模拟消费者的使用过程以确保产品性能100% OK第三步，我们将老化后的产品再次测试性能，然后封装第四步，将封装好的产品再次测试，测试OK后我们的产品可以安排包装了第五步：包装之后，我们的OQC部门会再次抽取一部分已经包装好的产品进行抽查，抽查的品质合格才安排出货如此严谨的品质控制，使我们收到大客户的青睐，并且能配合客户通过多项认证，例如Fcc，CE,UN38.3，MSDS我们的产品出口到美国，南非，意大利，土耳其以及日本。

这些客户跟我们都形成了战略合作伙伴的关系，每个月都会有追加的订单。