磷青铜材料性能规格.docx

磷青銅材料性能規格磷青銅 (Phosphor Bronze) 特性及規格一覽表：(1) 化學成份 (Chemical Composition)合金編號化學成份(wt. %)MaterialDesign ati onCuSnPPbFeZnC5111Rem.3.5~4.50.03~0.35< 0.05< 0.10< 0.30C5102Rem.4.2~5.50.03~0.35< 0.05< 0.10< 0.30JISC5191Rem.5.5~7.00.03~0.35< 0.05< 0.10< 0.30C5212Rem.7.0~9.00.03~0.35< 0.05< 0.10< 0.30(2) 物理特性(Physical Properties)合金編號(AlloyNo.)密度(De nsity)g/cm3彈性係數(Modulus ofElasticity)(Young's ModulusGPa熱膨脹係數(Coefficient of ThermalExpansion at 20 oC to300 oC)m/m. K熱傳導係數(ThermalCon ductivity at 20 oC)W/m. K導電率(ElectricalCon ductivity at 20oC)%IACSC51118.8611017.883.819C51028.8611017.869.215C51918.8411018.065.814C52128.8011018.262.312(3) 機械性質(Mechanical Properties)固溶熱處理，冷加工至1/8硬(1/8H);固溶熱處理，冷加工至硬態(H);沉澱硬化(AT); 1/4硬和沉澱熱處理(1/4HT);半硬和沉澱熱處理(1/2HT)O:退火(軟)狀態；H:加工硬狀態；EH:特硬狀態；SH:抗拉強度最大的加工製品；合金編號Alloy No.質別Temper符號Symbol抗拉試Ten sile test厚度Thick ness(mm)驗抗拉強度Ten sile stre ngth (kgf/mm2)延伸率(50mm)Elon gati on (i n2”)(%)硬度試驗Hard ness testHvThick ness>0.15mmOC5111R-O> 0.2> 30> 38-C5111H/4C5111R-H/4> 0.238~45> 28120~150H/2C5111R-H/2> 0.242~52> 18130~1603/4HC5111R-3/4H> 0.248~58> 10150~170HC5111R-H> 0.250~58> 8170~190EHC5111R-EH> 0.2> 58> 5> 190OC5102R-O> 0.2> 31> 40-H/4C5102R-H/4> 0.238~48> 28120~150C5102H/2C5102R-H/2> 0.248~58> 18150~1703/4HC5102R-3/4H> 0.250~58> 10170~190HC5102R-H> 0.258~68> 8190~210EHC5102R-EH> 0.2> 63> 5> 210C5191OCC5191R-O> 0.2> 32> 42 -H/4C5191R-H/4>0.240~52> 35120~150H/2C5191R-H/2>0.250~60> 20150~1703/4HC5191R-3/4H>0.252~62> 18170~190HC5191R-H>0.260~70> 10190~210EHC5191R-EH>0.265~75> 8210~230SHC5191R-SH>0.2> 75> 5230~270OCC5210R-O>0.2> 35> 45-H/4C5210R-H/4>0.240~52> 40120~150C5212H/2C5210R-H/2>0.250~60> 30150~1703/4HC5210R-3/4H>0.252~62> 20170~190HC5210R-H>0.260~72> 12190~210EHC5210R-EH> 0.270~80> 8210~230SHC5210R-SH> 0.2> 75> 5230~270磷青銅(Phosphor Bronze)合金各規格對照表規格名稱SPEC合金編號Alloy No.化學成分 Chemical Composition (wt.%)規格編號Spec no.CuSnPFeNiPbZnOthersISOCuSn 43.5~4.50.01~0.40<0.1<0.3<0.05<0.3—427CuSn 54.5~5.5CuSn 6Rem.5.5~7.5CuSn 87.5~9.0CNSC5101Rem.3.0~5.50.03~0.35————Cu+Sn+P=99.59503H3112C51915.5~7.0C52127.0~9.0JISC51113.5~4.50.03~0.35————Cu+Sn+P=99.5H3110C51024.5~5.5C51915.5~7.0C5212Rem.7.0~9.0C52107.0~9.0<0.1—<0.05<0.2Cu+Sn+P=99.7H3130ASTMC511003.5~4.90.03~0.35<0.1—<0.05<0.3—B103C510004.2~5.8C51900Rem.5.0~7.0C521007.0~9.0<0.2DINCuSn 4Rem.3.5~4.50.01~0.35<0.1<0.3<0.05<0.3<0.217662CuSn 65.5~7.5CuSn 87.5~8.5BSPB101Rem.3.5~4.50.02~0.40——<0.02<0.3—2870PB1024.5~5.5PB1035.5~7.5銅合金板材厚度公差 (Thickness tolerances for strip):磷青銅 (C2600、C2680、C2801)寬度 Width厚度公差Tolera nee厚度“s'JIS Sta ndard (H3100)S&T兰 400 mm400 ~ 650 mm兰 400 mmover 0.10 mm to 0.15 mm incl.±0.010 mm—±0.008 mmover 0.15 mm to 0.25 mm in cl.±0.015 mm—±0.010 mmover 0.25 mm to 0.40 mm in cl.±0.020 mm—±0.010 mmover 0.40 mm to 0.55 mm in cl.±0.025 mm±0.045 mm±0.012 mmover 0.55 mm to 0.70 mm in cl.±0.030 mm±0.050 mm±0.015 mmover 0.70 mm to 0.90 mm in cl.±0.035 mm±0.060 mm±0.015 mmover 0.90 mm to 1.20 mm incl.±0.040 mm±0.070 mm±0.020 mmover 1.20 mm to 1.50 mm in cl.±0.045 mm±0.080 mm±0.025 mmover 1.50 mm to 2.00 mm incl.±0.050 mm±0.090 mm±0.025 mm銅合金板材寬度公差 (Width tolerances for strip):寬度Width厚度公差Tolera neeJIS Standard (H3100)S&T兰 100 mm兰 200 mm兰 100 mm兰 200 mm0.10 ~ 0.55 mm.±0.10 mm±0.20 mm±0.05 mm±0.10 mm0.55 ~ 2.00mm.±0.20 mm±0.30 mm±0.10 mm±0.20 mm銅合金板材蛇彎度公差 (Permissible max. value on camber):寬度Width公差 Tolerance (per 1000 mm)over 6 mm to 9 mm inc9 mm max.over 9 mm to 13 mm in cl.6 mm max.over 13 mm to 25 mm in cl.4 mm max.over 25 mm to 50 mm in cl.3 mm max.over 50 mm to 100 mm in cl.2 mm max.over 100 mm1 mm max.Dimensional tolerances shall be in accordance with JIS H3100二lire亡tiun 门f RnllirgW=Width of Strip合金種類含錫丹銅磷青銅C4250C4250MC5050C5111C5102C5191C5210化性成份(％)銅:87~90. 錫:1.5~3.0鋅:餘量銅:86~88 錫：2.5~4.鋅餘量銅:餘量.錫:1.0~1.7磷:0.004~0.01銅:餘量.錫:3.5~4.9磷:0.11~0.13銅:餘量.錫:4.5~5.5磷:0.11~0.13銅:餘量.錫:5.5~7.0磷:0.11~0.13銅:餘量.錫:7.0~9.0磷:0.15~0.17比重(gm/cm3)8.7 88.78。