卡西欧5146 说明书.docx

本文格式为Word版，下载可任意编辑卡西欧 5146 说明书 GA-110B 英文 MO1003-EA Operation Guide 5146About This Manual Depending on the model of your watch, display text appears either as dark figures on a light background or light figures on a dark background. All sample displays in this manual are shown using dark figures on a light background. Button operations are indicated using the letters shown in the illustration. Note that the product illustrations in this manual are intended for reference only, and so the actual product may appear somewhat different than depicted by an illustration. Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the“Reference” section. General Guide Press C to change from mode to mode. In any mode (except a setting mode), press B to illuminate the display. Stopwatch Mode Countdown Timer Mode L L Timekeeping Mode Press C. Alarm Mode World Time Mode L TimekeepingYou can adjust the Home Time city date and time in the Timekeeping Mode. The analog time of this watch is synchronized with the digital time. The analog time setting is adjusted automatically whenever you change the digital time. If the analog time does not match the digital time for any reason, use the procedure described under“To adjust home positions” to match the analog setting to the digital setting. Pressing D in the Timekeeping Mode toggles digital display between the Home City Date and Home City Time. Home City DateDay of week Daylight Saving Time (DST)Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time. L DMonth Day Seconds PM indicator Hour: Minutes Seconds 12-hour and 24-hour timekeeping To set the digital time and date 1. In the Timekeeping Mode, hold down A for about three City code seconds until the currently selected city code flashes in the upper digital display. This is the setting mode. lll l 2. Use D (east) and B (west) to select the city code you want. Make sure you select your Home City code before changing any other setting. For full information on city codes, see the“City Code Table”. With the 12-hour format, the PM indicator (P) appears for times in the range of noon to 11:59 p.m. and no indicator appears for times in the range of midnight to 11:59 a.m. With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without the PM indicator (P). The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all other modes. PM indicator Hour: Minutes 3. Press C to change the flashing screen content in the sequence shown below to select the other setting.City Code Illumination Duration DST Day 12/24-Hour Format Month Seconds Year Hour Minutes 4. When the setting you want to change is flashing, use D or B to change it as described below. Screen: To do this: Change the city code Toggle the DST setting between Daylight Saving Time (on) and Standard Time (OFF). Toggle between 12-hour (12H) and 24-hour (24H) timekeeping Reset the seconds to 00 Change the hour and minutes Change the year, month, or day Press D. Do this: Use D (east) and B (west). Press D. 5. Press A to exit the setting mode. The day of the week is displayed automatically in accordance with the date (year, month, and day) settings. l l ll l ll StopwatchUpper display segments Seconds Speed hand Important! Check to make sure that the speed hand is not moving before you perform any Stopwatch Mode button operation. Specifying a Distance ValuePress D. Press D. Use D (+) and B (–). You can use the procedure below to specify a distance value, if you want. If you specify a distance value, the watch will calculate and indicate speed for certain stopwatch operations. The distance value represents kilometers, miles, or any other distance unit you want. Specifying a distance value of 10.0, for example, can mean 10.0 kilometers or 10.0 miles. No speed calculation is performed when 0.0 is specified as the current distance value. For lap time readings, you can specify either the lap distance (when all the laps are the same distance) or the total race distance. For split time readings, you can specify the total race distance only. Though the watch will indicate a speed each time you take a split reading, they will be based on the total race distance, and so they will not indicate actual intermediate split speeds. Toggle the display illumination duration between 1.5 seconds (LT1) and three seconds (LT3) ll lll Day of week l l ll l Home City Time To change the Daylight Saving Time (summer time) setting 1. In the Timekeeping Mode, hold down A for about three llll seconds until the currently selected city code flashes in the upper digital display. This i。