BTB产品介绍.ppt

BTB&FPC CONN.簡介,內容提要,BTB Connector介紹 產品功能介紹 產品主零件組成及形態區分要點 產品家族系列介紹 產品設計要點 產品編碼原則 FPC Connector介紹,一. BTB產品功能介紹,1. BTB定義: 即Board To Board:板對板,屬連接器中的 Level three. 2. 功用: 通常使用于Note Book中公母型連接器分別焊于主机板之Mother Board及CPU之Doughter- Board使其達成平行連接,訊號傳輸之目的.,,PC Connector Levels,,,,Level II,Level III,Level IV,Level V,,,,,Level VI,PCI ISA,MECHENICAL Solution FOR 3C INDUSTRY,一. BTB產品功能介紹,二. BTB產品之零件組成及公母形態區分要點,2-1. 零件組成: A: 塑膠 (Housing) B: 端子 (contact) C: 輔助元件,Housing,,Contact,,輔助元件,,,二. BTB產品之零件組成及公母形態區分要點,2-2.主要形態及其區分要點: A: 公型 (plug) B: 母型 (Receptacle) *區分要點: 端子接點具有彈性的一方為母型 產品,另一方則為公型產品.,二. BTB產品之零件組成及公母形態區分要點,Receptacle(母型),Plug(公型),,,三.BTB產品家族系列簡介,3-1. 0.8P BTB Conn. A: 0.8P S/D(Standard) BTB Conn.,,MH=516mm,三.BTB產品家族系列簡介,3-1. 0.8P BTB Conn. B: 0.8P L/P(Low Profile) BTB Conn.,MH=2.53.5mm,三.BTB產品家族系列簡介,3-1. 0.8P BTB Conn. C: 0.8P F-Type(Future-Type)BTB Conn.,MH=514mm,三.BTB產品家族系列簡介,3-1. 0.8P BTB Conn. D: 0.8P FOR CD-ROM BTB Conn.,三.BTB產品家族系列簡介,3-1. 0.8P BTB Conn. D: 0.8P FOR CD-ROM BTB Conn.,50Pos.,3-2. 0.635P BTB Conn. A: 0.635P S/D(Standard) BTB Conn.,三. BTB產品家族系列簡介,MH=516mm,3-2. 0.635P BTB Conn. B: 0.635P L/P(Low Profile)BTB Conn.,,,三. BTB產品家族系列簡介,MH=4mm,3-2. 0.635P BTB Conn. C: 0.635P Rec. For Card Bus GII BTB Conn,三. BTB產品家族系列簡介,136Pos.,三. BTB產品家族系列簡介,3-3. 0.6P H/S(High Speed) BTB Conn.,MH=413mm.,四. BTB產品設計要點,4-1. 配合介面,決定產品GAP值,,,,四. BTB產品設計要點,4-2. 配合高度,決定產品高度及Mating深度,,四. BTB產品設計要點,4-3. 焊接方式,四. BTB產品設計要點,4-4. Footprint Layout,決定產品Pitch值及焊腳寬度,,產品的主要功能參數,產品的主要功能參數,五.BTB產品編碼原則,(一) 0.6P H/S BTB編碼原則.,,SMT pick & place: B--single cap(black) C-- single cap(ivory),Q T S * NNN * -- * * * 1 (*),,,,,,,產品型態:0-Plug. 1-Rec.,產品之Pos. No. 030----30Pin | | | 160----160Pin,端子鍍金膜厚 A----25u” 6-----10u”以上,,,,Metal Ear狀態 1------W/ M/E,Metal shield & Solder Type: 0 1 Plug: W/O S/P. W/ S/P & SMT type Rec. W/O G/P. W/ G/P & SMT type,Profile Height: 1 2 3 4 5 E M 7 8 9 Plug:3.52 4.52 5.52 6.52 7.52 6.12 7.02 9.52 10.52 11.52 Rec. 3.25 7.25,,,,,PACKAGE(包裝): 2---- Tape&Reel(single),,,,,,,,,,,0.6P H/S BTB Plug,H=3.527.52mm,H=8.5211.52mm,,Core out,Core out,,0.6P H/S BTB Receptacle,H=7.25mm,core out,,No core out,,H=3.254.25mm,(二) 0.6P BTB for CardBus G2M編碼原則.,,W--for CardBus G2M,Q T S 1 NNN * -- * 1 2 1 W,,,,,,,產品型態: 1-Rec.,產品之Pos. No. 150----150Pin,端子鍍金膜厚 A----25u”,Metal Ear狀態 1------W/ M/E,Profile Height: 1: 5.05mm,,PACKAGE(包裝): 2---- Tape&Reel(single),,,,,,,,,,POST: 1----W/ POST,,(三).0.635P BTB編碼原則.,Q T 6 * NNN * -- * 1 * 1 (D),產品型態:0-Plug. 1-Rec.,產品之Pos. No. 020----20Pin | | | 160----160Pin,,,,,,,端子鍍金膜厚 A----25u” 6-----10u”以上,,,,,Metal Ear狀態 1------W/ M/E,PACKAGE(包裝): 2-Tape&Reel,W/Metal Clip 4-Tape&Reel(2-in-1) 5-Tube,POST: 1----W/ POST,Profile Height: 1 2 3 4 6 7 9 A Plug: 4.0 5.0 6.0 7.0 9.0 4.5 12.0 Rec.: 4.0 10.0,,SMT pick & place D:2-IN-1cap(pitch=10),,,,,,,,,,,,0.635P BTB Plug,H=3.107.0mm,H=8.012.0mm,Core out,,Core out,,0.635P BTB Receptacle,H=4.0mm,H=10.0mm,Summary of special part no.:,QT61NNN6-0121,0.635p Rec.,Profile Height: 0: 3.10mm w/ different structure,,,0.635p Plug,QT60NNN6-0121,,Profile Height: 0: 3.25mm w/ different contact,,,Different: the structure of contact and housing the tip of contact does not is different from 0.635p standard, bend toward the housing because the profile height is low wall,,,difference,Customer:Inventec P64,(四)0.635P special P/N For Card Bus GII BTB編碼原則.,Q T 6 1 NNN * -- * * 1 0 C,,,,,,,,產品之Pos. No. 136----136Pin,端子鍍金膜厚 A----25u” 6-----10u”以上,,,,Metal Ear狀態 0-----W/O M/E,PACKAGE(包裝): 1----Tape&Reel,W/PI Film,Metal Shield & Solder Type: 1--w/ shield & SMT TYPE 2--w/ shield & T/H TYPE,Profile Height: 1:H=4.0 w/housing wall 2:H=5.0 w/housing wall 3:H=4.0 w/o housing wall & lead “L” type,,,,,Card Bus GII,,,,,,,,,(五). 0.8P S/D BTB編碼原則.,Q T 8 * NNN * -- * 1 1 *,,,,,,,,,,產品型態:0-Plug. 1-Rec.,產品之Pos. No. 020----20Pin | | | 160----160Pin,端子鍍金膜厚 A----25u” 6-----10u”以上,,,,,,Metal Ear狀態 0-----W/0 M/E 1------W/ M/E,PACKAGE(包裝): 1----Tape&Reel,W/PI Film,POST: 1----W/ POST,Profile Height: 1 2 3 4 Plug:4.25 5.25 6.25 7.25 Rec. 4.25 8.25 12.25,,,,,,,,,0.8P S/D BTB Plug,H=4.257.25mm,,Core out,0.8P S/D BTB Receptacle,H=4.25mm,H=8.2512.25mm,(六) 0.8P F/T special BTB編碼原則.,Q T 8 * NNN * -- * 9 * 0,,,,,,,,,產品型態:P-Plug. R-Rec.,產品之Pos. No. 020----20Pin | | | 120----120Pin,端子鍍金膜厚 A----25u” 6-----10u”以上,,,,,,Metal Ear狀態 0-----W/0 M/E,PACKAGE(包裝): 1---Tape&Reel,W/PI Film 2---Tape&Reel,W/Metal Clip,POST: 9----W/ POST,Profile Height: 1 2 3 4 Plug: 4.6 5.6 6.6 7.6 Rec. 3.75 11.75,,,,,,,,,,Summary of special part no.:,QT8PNNNA--3910N,QT8RNNNA--1910N,0.8 F/T Plug,0.8 F/T Rec.,,Narrowed Tail Length: N: 4.40mm,,Narrowed Tail Length: N: 4.40mm,,,,Customer: Quanta JM1 for Dell Bondi,,,,,Change from 5.60mm4.40mm,(七-1) 0.8P R/A BTB for T/H編碼原則.,Q T 8 * NNN * -- * 1 0 * (*),,,,,,產品型態: 0-Plug. H-Rec. R/A TYPE,產品之Pos. No. 050----50Pin,端子鍍金膜厚 A----25u” 6-----10u”以上,,,,,,LO。