学士学位论文:毁伤模式可调战dou部设计与仿真
66页1、沈阳理工大学学士学位论文摘 要毁伤模式可调战斗部是在现役弹药系统内的战斗部难以满足未来战场对弹药的需求而产生的一种新型战斗部。该战斗部的特点是在不需要改变装药结构下,通过控制战斗部外围部分的张开与闭合来实现两种不同毁伤元之间的转换,满足弹药毁伤机理的多样性以及灵活性。本文设计了一种毁伤模式可调战斗部结构,分析了此种战斗部的作用原理;利用ANSYS/LS-DYNA软件数值模拟分别研究了EFP和破片的成型过程,得到了药型罩参数及装药参数对EFP毁伤元特性的影响规律,获得了破片的初速、速度沿轴向分布、飞散角、数量和质量分布等特性参数。数值模拟了战斗部外围部分展开状态和闭合状态下毁伤元的成型过程,并对模拟结果进行归纳和分析。基于对上述规律的研究和分析,有效验证了在同一装药结构下,通过改变战斗部结构来实现两种毁伤模式的转换的可行性。关键词:模式转换;EFP;破片;战斗部AbstractThe damage mode adjustable warhead is a new type of warhead which is difficult to meet the demand of ammuni
2、tion in the active ammunition system. The warhead of the characteristics does not need to change the charging structure, by controlling the warhead peripheral parts of the open and closed to realize two different damage elements between the conversion and meet the ammunition damage mechanism, flexibility and diversity.In this paper, a kind of damage mode adjustable warhead is designed, and the function principle of this kind of warhead is analyzed. Using software of ANSYS / LS-DYNA, numerical si
3、mulation were studied the forming process of EFP and fragment and get the liner parameters and charge parameters of EFP kill element characteristics influence law. The fragment velocity and velocity distribution along the axial direction and scattering angle, the quantity and quality of distribution parameters were obtained. Numerical simulation is made on the forming process of damage element in the state and the closed state of the peripheral part of warhead, and the simulation results are sum
4、marized and analyzed. Based on the research and analysis of the above rules, it is proved that the conversion of the two damage modes can be realized by changing the structure of the warhead under the same charge structure.Key words: switchable modes; EFP; fragment; warheadIV目 录1 绪论11.1 研究背景及意义11.2 国内外研究现状11.2.1 国外研究现状11.2.2 国内研究现状31.3 本文研究内容42 可调战斗部结构设计与毁伤元成型数值模拟52.1 毁伤模式可调战斗部的结构52.2 毁伤模式可调战斗部的作用原理62.3 毁伤元成型数值模拟82.3.1 数值方法82.3.2 EFP毁伤元成型数值模拟102.3.3 破片毁伤元成型数值模拟123 装药结构参数与可调毁伤元的匹配关系143.1 EFP毁伤元成型
《学士学位论文:毁伤模式可调战dou部设计与仿真》由会员绿**分享,可在线阅读,更多相关《学士学位论文:毁伤模式可调战dou部设计与仿真》请在金锄头文库上搜索。
建筑三类人员考试题库(最新标准版))
重庆市建筑业三类人员(ABC证)考试复习题库
两单两卡手册
水利水电工程单元工程施工质量验收评定表及填表说明(上册)
毕业论文:网页设计与制作
毕业论文:小鼠microRNA-125b过表达载体构建
青塘学院应用心理学专业本科毕业论文
河南经贸职业学院计算机多媒体技术专业毕业论文
毕业设计:Separation of Microimpurity and Identification of Sodium Tanshinone IIa Sulfonate
湖南科技大学成教工商管理专业学生毕业论文
山东建筑大学2015届药学本科毕业设计说明书
毕业设计:丹参酮IIa磺酸钠微量杂质的分离及结构鉴定
建设工程招投标中不平等问题探讨(两篇)
本科生毕业论文:Discussion On Inequality In Bidding Of Construction projects
成都理工大学工程技术学院工程管理专业毕业论文
广东海洋大学寸金学院工程管理专业本科生毕业论文
本科生毕业论文:建设工程招投标中不平等问题探讨
毕业论文:建设工程招投标中不平等问题探讨
《义务教育学校管理标准》工作自查报告、练习题、测试卷
毕业设计:基于单片机的MODBUS通讯器的设计
2023-09-13 14页
2022-10-04 5页
2023-09-02 20页
2023-09-23 3页
2023-01-14 6页
2023-07-11 5页
2024-01-23 83页
2023-05-29 28页
2022-12-05 11页
2023-09-09 5页