avaya server_s8800

Avaya Fall 2009 Tech Transfer Tuesday Morning October 6th, 2009,S8800 Server Overview,Lee Lorimer,S8800 Overview,What is the S8800? S8800 Front Panel Controls/Indicators S8800 Motherboard S8800 Power Supply S8800 Rack Mounting Provisions S8800 RAID Configurations S8800 Boot Times S8800 1U Unique Configuration S8800 1U Front and Rear Panels S8800 2U Unique Configuration S8800 2U Front and Rear Panels S8800 Application Configurations S8800 Additional Information Contacts,What Is The S8800 Server,The S8800 is the newest Avaya server platform. Currently will be used across 22 different “application configurations”. The S8800 employs one or two of the new quad core Intel I7 “Nehalem” Processors. Standard processor speed is 2.26 GHz 2.93 GHz version is available if needed. “Nehalem” CPU supports a 3 channel memory architecture. All configurations use the new 10600 DDR3 Registered RDIMMs (1333 MHz). 2 GB DIMMs are utilized across all S8800 platforms. Maximum of 16 GB of DRAM per installed CPU with 2GB DIMMs Hard drives are SAS 10K 146 GB drives by default. 15K drives are available as an option. RAID 1, 5 and 10 configurations are available.,What Is The S8800 Server (Continued),2 each Gigabit Ethernet NICs on Motherboard, 2 each Gigabit Ethernet NICs on Daughterboard (if needed), 2 additional Gigabit Ethernet NICs on PCI board if needed Uses uEFI, (Unified Extensible Firmware Interface) - the new industry replacement for BIOS IMM (Integrated Management Module) Consolidates the service processor, SuperI/O, video controller, and remote presence into a separate processor (system on a chip) on the server motherboard Replaces the baseboard management controller (BMC) Performs the familiar POST functions such as inventories and tests board components Matrox G200 SVGA Video Controller with 2 video ports one on front panel and one on rear pane. The S8800 is available in a 1U and a 2U configuration. Of the 22 configurations discussed here, 15 of them will utilize the 1U configuration.,S8800 Front Panel Controls/Indicators,S8800 Front Panel,Operator Information Panel,Light Path Panel,(Used only by Server Vendor experts),S8800 Motherboard,x3550 Motherboard,S8800 Power Supply,675 Watt Power Supply All applications require at least one power supply High availability applications require redundant supplies total of two Other applications may add redundant supply as an option,S8800 Rack Mounting Provisions,The S8800 Server will ship with a Quick deploy rail kit that supports tool-free installation in a 4-post racks with square or round mounting holes. This rail kit will fit most standard 4 post racks. Install the server in a rack that meets the following requirements: Minimum depth of 70 mm (2.76 in.) between the front mounting flange and inside of the front door. Minimum depth of 157 mm (6.18 in.) between the rear mounting flange and inside of the rear door. Minimum depth of 718 mm (28.27 in.) and maximum depth of 762 mm (30 in.) between the front and rear mounting flanges to support the use of the cable-management arm.,S8800 RAID Configurations,S8800 supports RAID 1, RAID 5 or RAID 10 disk array configurations depending on application RAMDISK is not used RAID arrays provides ability to divide and replicate data among multiple hard disk drives resulting in higher levels of disk storage reliability If any one drive fails, the remaining disk(s) continue to function without service interruption Automatically “rebuilds” replacement hard drive with a copy of data If multiple disks fail, server is out-of-service. All S8800 hard disk drives are “hot pluggable” Major Alarm Disk Failure Absence of second disk on system boot-up RAID related events recorded in Syslog Removal or plugging in of redundant hard disk drives hard disk drive rebuild start/stop/failure All configurations utilize the IBM MR10i RAID controller except for the AES server which uses a BR10i controller,S8800 Boot Times,* This period can be identified by a fast flash ( 3 times per second) of the power button. Once the power button begins to flash slower ( 1 time per second) the server can be turned on.,S8800 1U Unique Configuration,IBM x3550m2 Platform All standard S8800 features previously listed Six 2.5-inch hot-swap SAS or hot-swap SATA hard disk drive bays Supports two PCI risers: Slot 1 supports low-profile cards (PCI Express Gen2 x16 or PCI-X 1.0a 64-bit/133 MHz ). Slot 2 supports half-length, full-height cards (PCI Express Gen2 x16 or PCI-X 1.0a 64-bit/133 MHz). Six dual-motor hot-swap fans. Form Factor: 1U Height x Length x Depth: 1.7” x 17.3” x 28.0” (43 mm x 440 mm x 711 mm) Weight: 34 lbs (15.4 kg ) when fully configured,S8800 1U Unique Configuration (Continued),Electrical input: Sine-wave input (47 - 63 Hz) required Input voltage low range: Minimum: 100 V ac Maximum: 127 V ac Input voltage high range: Minimum: 200 V ac Maximum: 240 V ac Input kilovolt-amperes (kVA), Minimum: 0.194 kVA Maximum: 0.700 kVA Heat Output Minimum configuration 662 Bt