AS2047最新中英对照-图纸翻译(共99页)

精选优质文档-倾情为你奉上 Windows and external glazed doors in buildings建筑中的窗户和外门 PREFACE 前言This Standard was prepared by the Joint Standards Australia/Standards New ZealandCommittee BD-021, Doors and Windows, to supersede, AS 20471999, Windows inbuildings. After allowing sufficient time for adjustment (nominally 12 months frompublication), the superseded document will be withdrawn.本项标准是由澳洲标准协会，新西兰标准协会联合出版。在建筑行业，门窗-021委员会取代了门窗2047-1999，在留出了足够的时间调整之后，替代的文件将被撤回。After consultation with stakeholders in both countries, Standards Australia and StandardsNew Zealand decided to develop this Standard as an Australian Standard rather than anAustralian/New Zealand Standard.作为息息相关的两个国家，澳洲标准协会和新西兰标准协会决定开发一种标准作为澳洲标准，而不是澳洲新西兰标准。 The objective of this Standard is to provide window designers and manufacturers with ageneric requirement for windows in buildings, setting out the performance requirements andspecifications in the design and manufacture of all windows, regardless of materials.本标准的目的是提供门窗设计师和制造商在建筑行业对门窗有一个一定的规范要求。不仅是对材料，还设置了对门窗性能要求，以及在设计和生产上的明细要求， This edition differs from the previous edition as follows:此版本一下几点不同于以前版本的地方：(a) Hinged, pivot and bi-fold doors have been added to the scope of the Standard.(b) Wind pressures for housing, including cyclonic regions and corner conditions, havebeen updated to ensure alignment with AS 4055, Wind loads for housing.(c) The deflection/span ratio for housing and residential buildings has been changed toalign with the new lower serviceability limit state wind pressures.(d) Additional guidance is given for the extrapolation of test results to larger sizewindows and the substitution of structural members and components.(e) Updated requirements for windows made from unplasticized PVC (uPVC).(f) The guide to wind pressures (Appendix A) has been revised to ensure alignment withAS 1170.2.(g) Appendix B (Environmental considerations) has been included to ensure alignmentwith current Standards.A 铰接，枢轴和双折门已被添加到该标准的范围。B 房屋风压，包括气旋区域和偏僻地区的条件下，都已经被更新，以确保与AS4055，房屋承受风力一致。C 房屋和住宅楼的偏转/跨比已更改为新的较低极限状态风压D 针对大尺寸门窗和结构部件的测试结果都给出了指导性建议E更新了对门窗的要求F AS1170.2.为了确保和AS1170.2标准保持一致。对风压指南（附录）进行了修订G为了确保与当前的标准一致，已将附录B环境因素列入 .In this Standard, statements expressed in mandatory terms in notes to tables and figures aredeemed to be an integral part of the Standard.The terms normative and informative have been used in this Standard to define the application of the appendix to which they apply. A normative appendix is an integral partof a Standard, whereas an informative appendix is only for information and guidance.在此标准，以表格和图形特别说明的被认为是标准的一个组成部分,“规范”和“信息”这个两个条款已经使用本标准来定义它们在适用的附录中的应用。“规范”附录是标准的一个组成部分，而一个“信息”附录仅提供信息和指导目录CONTENTS 第一节：范围和综述SCOPE AND GENERAL1.1 范围SCOPE. 51.2 规范性参考 NORMATIVE REFERENCES. 61.3定义DEFINITIONS. 8 第二节 性能PERFORMANCE2.1综述GENERAL . 122.2 大气环境ATMOSPHERIC ENVIRONMENTS . 122.3窗的性能WINDOW PERFORMANCE . 122.4 更小或更大尺寸的产品的验证VERIFICATION OF SMALLER OR LARGER SIZE PRODUCTS. 172.5使用和评定窗的耦合系统USE AND RATING OF WINDOW COUPLING SYSTEMS . 192.6 替代物SUBSTITUTION . 19 第三节 框架及表面材料FRAMING AND FINISHES3.1铝合金窗ALUMINIUM WINDOWS . 213.2实木窗.TIMBER WINDOWS. 223.3UPVC窗UNPLASTICIZED PVC (UPVC) WINDOWS . 253.4其他材料的窗WINDOWS OF OTHER MATERIALS . . 27 第四节 玻璃GLAZING4.1综述GENERAL . 284.2玻璃GLASS . 284.3玻璃材料GLAZING MATERIALS . 28 第五节：部件配置COMPONENTS5.1 五金HARDWARE . 295.2 紧固