产品缺陷中英文对照表Word
產品缺陷中英文對照表2001/2/18中文咖啡壺缺陷等級高壓響Hi-pot test failsCR水線不通Ground continuity test failCR沒功能Malfunction MA無功率Dead unitMA功率偏高Power out upper limitedMA功率偏低Power out lower limitedMA燈不亮Indicator lamp on switch not lit upMA漏裝膠腳Missing rubber footMA膠腳不平Rocking on rubber footMI漏放說明書Missing instruction bookMA絲印刮花Scratch on silk-screenMI指示管絲印不良Poor silk-screen on water level tubeMI漏斗絲印花Poor silk-screen on basketMI指示管漏絲印Water level tube missing silk-screenMA電線不洁Dirty on power supply cordMI入水管漏水Leaking on input water tubeMA漏斗不能止水No drip stop on filter basketMA漏斗披峰Flashing on filter coneMI底座与底蓋离拉Gap between base and bottom coverMI底座与底蓋錯位Step between base and bottom coverMI玻璃杯爛Damaged carafeMA玻璃杯崩口Broken edge of carafeMA玻璃杯花和有泡點Scratch and blister on carafeMI入水管未裝到位Input water tube out the positionMI前頂蓋未扣到位Front cabinet cover unlatchedMI前頂蓋刮花Scratch on front cabinet coverMI前頂蓋爆裂Cracked front cabinet coverMA前頂蓋与水管离位Gap between front cabinet cover and tankMI保溫板刮花和不洁Scratch and dirty on warming plateMI保溫板防水圈未裝到位Warming plate seal ring out the positionMI螺絲滑牙和掃頭Broken thread and screw head damagedMA机內雜物Foreign object inside the unitMA保溫杯內雜物Foreign object inside carafeMA漏裝漏斗插針孔膠塞Missing the plug of pin hole of basketMA玻璃杯邊刮手Sharp edge on carafeCR/MA漏斗內有披峰堵塞Flashing block the outlet of basket MA前頂蓋變形Deformed front cabinet coverMA指示管浮球披峰Flashing on indicative ballMI干煲燒FUSEThermofuse burn off as dry heatingMA開關制偏緊Power switch stiffMI開關接触不良Power switch interruptedMA漏裝杠杆Missing the drip-stop leverMA漏斗扣位松Filter basket latch looseMI漏放附件Missing accessoriesMA水箱外發白White mark on the tankMI指示管倒裝Water level tube reversalMA杯柄不正Spout of carafe misalignment with handleMI后頂蓋与水箱离拉Gap between tank and tank coverMI后頂蓋扣位斷Broken snap on tank coverMA后項蓋爆裂Cracked tank coverMA水箱爆裂Cracked tankMA水箱混色和刮花Mixed color and scratch on tankMI后頂蓋刮花和不洁Scratch and dirty on tank coverMI隔熱圈爆或崩口Broken and cracked insulation ringMA隔熱圈刮花和有散熱油Scratch and oil dirty on insulation ringMI水箱縮水和气紋Shrinkage and flow mark on tankMI底座爆裂Cracked baseMA底座刮花及黑點Scratch and black spot on baseMI水箱与底座顏色不同Color mismatch between tank and baseMI指示管膠塞漏水Leaking on plug of water indicatorMA漏裝浮球Missing water indicative ballMA保溫瓶內有雜物(玻璃碎)Foreign object inside carafe(A fragment of glass) MA杯蓋單向閥披峰Flashing on valve of carafe coverMI漏斗軸漏裝膠塞Missing plug on basket axesMa保溫板密封圈未裝到位Keep warming plate seal ring out the positionMa底蓋隔熱板氧化Oxidate mark on bottom coverMa水箱与底蓋夾有膠紙Protective paper clamped between tank and baseMI指示管彈起Water level tube out the positionMI保溫瓶蓋漏裝單向閥Missing valve of carafe coverMA保溫瓶蓋漏裝密封圈Missing seal ring on carafe coverMA水箱入水口波珠不動Quiescent ball of water inletMA壺蓋阻流器松動Loose stopper of carafe coverMA線套爛Damaged power supply cord bushingMA 面包机發熱管污跡Dirty on heaterMI底座与外殼錯位Step between housing and bottom coverMI卡通箱漏印字嘜Missing marking on cartonMA漏貼電壓貼紙Missing rating labelMA電線燙傷表皮Damaged power cordMI頂蓋內有雜物Foreign object inside lidMA用錯面包桶Wrong bake panMA纖維線露出窗外Fiber wire out the shutter on housingMA頂蓋黑點Black spot on lidMI控制蓋混色Mixed color on control panel coverMI插頭不洁和花Scratch and dirty on the power plugMI攪粉時摩打不轉No rotation while kneading doughMA摩打不轉Motor not rotationMA電線偏短Short power cordMA控制蓋与外殼顏色不一致Color mismatch between control panel cover and metal housingMI外殼麻點Blister on metal housingMI摩打与發熱管同時工作Motor and heater uncontrolledMA外殼夾有頭發A hair clamped on housingMI外殼變形Dent on outside housingMI流水編號錯誤Wrong serial numberMA面包桶變形Deformed bake panMI量杯底有披鋒 Flashing on measuring cupMI發熱管松動Loose heaterMI電壓貼紙不洁Dirty on rating label MI自動開机Uncontrolled power on MA控制蓋与外殼夾有內接線Inner wire clamped between control panel cover and metal housingMA控制蓋螺絲掃頭Damaged screw head on control panel coverMA頂蓋与外殼离拉Gap between lid and metal housingMI外殼補油不良Poor finishing on metal housingMI外殼刮花Scratch on metal housingMILCD內有污物Dirty in the LCD windowMI控制蓋刮花Scratch on Control panel coverMI控制蓋邊批損Scratch on edge of control panel coverMI按鍵手感不良Poor touching on buttonMILCD鏡片裝配不正LCD display screen misalign met with the window of control coverMI外殼有絲印油Paint on metal housingMI玻璃窗花及污跡Scratch and dirty on glass of lidMI開机無“B”聲No buzzingMA面貼翹起Control panel label liftingMI顯示缺划LCD display miss segmentMA漏裝膠腳Missing rubber footMA開机顯示”ES”Malfunction with "ES" on LCD while energizationMA桶緊及桶松Baking pan loose or tightMI內箱氧化
