您所在位置：网站首页 > 学术论文 > 毕业论文年产413万吨热轧板带钢车间设计毕业设计

年产413万吨热轧板带钢车间设计毕业设计

114页

卖家[上传人]：aa****6

文档编号：37629679

上传时间：2018-04-20

文档格式：DOC

文档大小：1.31MB

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

20 金贝

/ 114 举报版权申诉马上下载

文本预览

下载提示

常见问题

1、安徽工业大学毕业设计（论文）说明书共 V 页第 I 页装订线年产 413 万吨热轧板带钢车间工艺设计摘要钢铁业是一个国家基础工业中非常重要的组成部分，也是国家经济发展的重要支柱。我国钢铁工业发展较快，工艺结构逐步改善，但生产专业化自动化程度低，技术不够先进等等，导致还有很多产品需要从国外进口。这些年来，随着我国的经济发展，热轧板带钢在国内市场的需求空间越来越大，为弥补我国宽带钢供应不足而设计此热轧带钢车间。根据设计任务书要求，本车间设计年产量热轧钢卷 413 万 t；钢种有普碳钢，优质钢和低合金钢；产品规格为 1.525.410001900。设计内容主要包括：产品方案，工艺流程，设备选择及生产能力计算，车间平面布置，环境保护等。本车间采用常规半连轧工艺。板坯全部采用连铸坯。为减少坯料规格，简化轧制程序，采用定宽压力机。为提高产品质量，精轧机各架全采用 CVC 轧机。为提高设计效率和质量；采用 VB 语言编制了压下规程程序；采用 CAD 绘制车间平面布置图。关键词：车间设计，热轧带钢，CVC 轧机安徽工业大学毕业设计（论文）说明书共 V 页第 II 页装订线 An

2、nual output of 4.13 million tons of hot rolled flat steel plant process designAbstractSteel is a very important part of the national base-industry,it is the important pillar of nationaleconomic development. In China, steel industry is developing fast and the sructures of the process is gradually improving, however, the low automatic, insufficient specialized degree, unadvanced technology and other reasons have lead to that many products need imported from abroad.These years, with the development

3、 of economy in China, the demand of steel in every field has been greately increased. In order to make up for a wide strip in short supply, a hot rolling strip mill is designed. According to the design plan descriptions of the requirement, the annual production workshop design about grades of hot rolled steel coils of 4.13 million tons; A kind of carbon-steel, high-quality steel and low alloy steel; The product specification for 1.5 25.4 x 1000 1900 .Design content mainly includes: products, pro

4、cess, equipment selection and production capacity calculation, workshop layout, environment protection, etc. This workshop half the conventional rolling process. All the slab continuous casting slab. To reduce stock specifications, simplify the rolling process, USES the fixed width press. In order to improve the product quality, the frame by finishing all CVC rolling mill. In order to improve the design efficiency and quality. The VB language under the pressure of rules program; Using CAD drawing workshop floor plan.Key words: workshop design, strip, CVC rolling mil安徽工业大学毕业设计（论文）说明书共 V 页第 III 页装订线目录摘要.I Abstract.II 目录.III 1 概述.1 1.1 热轧板带钢发展史.1 1.1.1 热连轧板带钢的种类和用途.1 1.2 板带钢生产技术发展趋势.2 1.3 轧钢的发展状况.2 1.3.1 轧钢装备的发展状况.3 1.3.2 轧钢工艺技术的发展状况.3 1.3.3 轧钢生产中节能技术的研究.3 1.3.4 轧钢技术发展前景.4 1.4 热轧带钢发展趋势及市场.4 1.5 本设计的目的和意义.5 1.6 本设计的相关问题.6 2 车间产品大纲和金属平衡.7 2.1 车间产品大纲.7 2.1.1 金属平衡图.7 2.2 板坯及产品规格.8 2.2.1 板坯.8 2.3 产品特点.8 2.3.1 产品质量标准.8 2.3.2 产品性能.

《年产413万吨热轧板带钢车间设计毕业设计》由会员aa****6分享，可在线阅读，更多相关《年产413万吨热轧板带钢车间设计毕业设计》请在金锄头文库上搜索。

点击阅读更多内容

TA的资源